Re: hostapd error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/25/2016 03:14 PM, Ann Lo wrote:
Hi,

When I run hostapd using 80 MHz channel, sometimes I get the following
error. Would you provide information on this error? What is the
solution when this error happens?

Switch own primary and secondary channel due to BSS overlap with
9c:d6:43:2e:8a:28

This is normal when it detects another AP on overlapping channel
using a different primary channel.

Using interface uap0 with hwaddr 82:14:3e:f0:9c:b0 and ssid "caytestac"
Failed to set beacon parameters
hostapd: Interface initialization failed

Please run hostapd with verbose logs and see if it gives more details about
what fails.

Thanks,
Ben

--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux