Am 15.03.2016 um 16:15 schrieb Dmitrijs Ivanovs: > WDS station is bound to specific interface such as wlan0.sta1. Current > code rebinds it back to to wlan0 in case of reassociation. Because of > this, traffic is not flowing. My patch fixes this problem. If this code rebinds the station to wlan0, sta->vlan_id is not properly set. As the station is currently bound to wlan0.sta1, sta->vlan_id was once properly set and then got cleared (sometime after ap_sta_bind_vlan was called). Clearing sta->vlan_id does not immediately populate into the station being bound to wlan0 - this is put into effect by ap_sta_bind_vlan. So the fix should be about setting sta->vlan_id properly. Currently sta->vlan_id is set by ap_sta_set_vlan during 802.11 auth (e.g. for using macaddr_acl=2), during 802.1x (RADIUS Access-Accept) and when authenticating using PMKSA cache. These code paths also clear sta->vlan_id for example if RADIUS Access-Accept does not include a VLAN information. Regards, M. Braun _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
