Am 10.03.2016 00:55, schrieb Ben Greear:
We've been trying to get this working, but no luck so far.
Are you trying to use AP_VLAN?
I notice you have 'ft_bridge' config in your examples, but I cannot
find
any reference to that in my hostapd repo. Is this one of the private
features that is not upstream yet? Is it required?
ft_bridge is not upstream. It forces hostapd to use a different
interface for inter-AP communication. This is useful for example if the
bss interface (on ap) is not in a bridge - e.g. when used with AP_VLAN.
Instead you might need to set the bridge configuration option, so
hostapd will listen on it.
Regards,
M. Braun
Thanks,
Ben
On 11/03/2015 12:26 PM, M. Braun wrote:
Hi,
I'm running this for about half a year with about 80 APs, full dynamic
VLANs, 1X and PSK and about 2k registered and 400 active devices.
hostapd can exchange messages with other hostapd-based devices to
manage FT AP-AP operations.
Oooh, nice. Anyone have some example configs that have this enabled?
I've just published [1] lurking around for some time unpublished. Hope
it helps. Although that also includes some settings not yet send
upstream, it should also cover everything needed for operation of
current upstream hostapd.
Regards,
M. Braun
[1]
https://blog.fem.tu-ilmenau.de/archives/1002-HowTo-enable-WiFi-roaming-with-hostapd-and-VLANs.html
Am 03.11.2015 um 20:03 schrieb Ben Greear:
On 11/03/2015 11:00 AM, Jouni Malinen wrote:
On Tue, Nov 03, 2015 at 07:29:48AM -0800, Ben Greear wrote:
Does hostapd have the ability to do 802.11r between 2+ APs?
Yes.
I know at least some implementations of 802.11r require a
controller
box, so I'm curious if hostapd somehow gets around that?
I'd like to give it a try...
Thanks,
Ben
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
