Hi Jouni, Thank you for the quick feedback or this issue. The issue got resolved on disabling "eap_server=1". Regards Justin ----- Original Message ----- From: Jouni Malinen <j@xxxxx> To: justin.philip@xxxxxxxxx Cc: "hostap@xxxxxxxxxxxxxxxxxxx" <hostap@xxxxxxxxxxxxxxxxxxx> Sent: Friday, February 19, 2016 9:53 PM Subject: Re: EAP Authentication failure on using hostap version 2.3-5.1.1 On Fri, Feb 19, 2016 at 04:17:12AM +0000, justin.philip@xxxxxxxxx wrote: > I have setup hostap version 2.3-5.1.1 to do WPA-EAP authentication. > Radius server configured and running on a machine. Radius server is tested to work fine when using a DLINK AP for EAP-PEAP, EAP-TLS. > > When I try to use the hostap to start a EAP-PEAP/EAP-TLS, I am facing authentication failure:- ... > Attaching the hostap configuration file and logs. That hostapd.conf has invalid authentication configuration. It is trying to enable both use of an external RADIUS authentication server (auth_server_*) and use of the internal server (eap_server=1). You need to remove one of those based on which option you want to use. Since there was not a complete configuration of the internal server, I'd assume eap_server=1 should be removed from the configuration. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap