Hi,
I am trying to run my AP on 5Ghz but I have some issue..
First of all I changed my country code thanks to CRDA to FR.
iw reg get
global
country FR: DFS-ETSI
(2402 - 2482 @ 40), (N/A, 20), (N/A)
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW
(5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS
(57000 - 66000 @ 2160), (N/A, 40), (N/A)
iw list
Frequencies:
* 5180 MHz [36] (15.0 dBm) (no IR)
* 5200 MHz [40] (15.0 dBm) (no IR)
* 5220 MHz [44] (15.0 dBm) (no IR)
* 5240 MHz [48] (16.0 dBm) (no IR)
* 5260 MHz [52] (15.0 dBm) (no IR, radar detection)
DFS state: usable (for 924 sec)
DFS CAC time: 60000 ms
* 5280 MHz [56] (15.0 dBm) (no IR, radar detection)
DFS state: usable (for 924 sec)
DFS CAC time: 60000 ms
* 5300 MHz [60] (15.0 dBm) (no IR, radar detection)
DFS state: usable (for 924 sec)
DFS CAC time: 60000 ms
* 5320 MHz [64] (15.0 dBm) (no IR, radar detection)
DFS state: usable (for 924 sec)
DFS CAC time: 60000 ms
* 5500 MHz [100] (17.0 dBm) (no IR, radar detection)
DFS state: usable (for 924 sec)
DFS CAC time: 60000 ms
* 5520 MHz [104] (17.0 dBm) (no IR, radar detection)
DFS state: usable (for 924 sec)
so I should be able to use channels 100-104 if I activate DFS, but I
have an issue when I start hostap :
HT40: control channel: 104 secondary channel: 100
Completing interface initialization
Mode: IEEE 802.11a Channel: 104 Frequency: 5520 MHz
DFS 2 channels required radar detection
DFS all channels available, (SKIP CAC): no
DFS 0 chans unavailable - choose other channel: no
pnic_wlan: interface state HT_SCAN->DFS
DFS start CAC on 5520 MHz
pnic_wlan: DFS-CAC-START freq=5520 chan=104 sec_chan=-1, width=0,
seg0=0, seg1=0, cac_time=60s
nl80211: Start radar detection (CAC) 5520 MHz (ht_enabled=1,
vht_enabled=0, bandwidth=40 MHz, cf1=5510 MHz, cf2=0 MHz)
* freq=5520
* vht_enabled=0
* ht_enabled=1
* sec_channel_offset=-1
* channel_type=2
nl80211: Failed to start radar detection: -16 (Device or resource busy)
DFS start_dfs_cac() failed, -1
Interface initialization failed
I tried to compile my kernel module with the modified module but I only
found one value (|ATH9K_DFS_CERTIFIED) but it doesn't change anything I
keep having the same error message in hostap.
Just trying my luck here if anyone has some idea for me..
many thanks
|
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
