Hello all, I have a P2P peer trying to connect to a group owner. Here is the sequence that fails All user entered commands are prepended with [intf : xxxx] ---P2P Peer trying to join group-- [intf : p2pdev0] p2p_find 8 dev_id=5c:31:3e:d4:82:4f freq=2462 --Group Owner-- P2P-DEVICE-FOUND 84:dd:20:76:4a:ab p2p_dev_addr=84:dd:20:76:4a:ab pri_dev_type=1-0050F204-1 name='PEER_P2P' config_methods=0x108 dev_capab=0x25 group_capab=0x0 --P2P Peer trying to join group-- [intf : p2pdev0] p2p_prov_disc 5c:31:3e:d4:82:4f display join --Group Owner-- P2P-PROV-DISC-SHOW-PIN 84:dd:20:76:4a:ab 83987175 p2p_dev_addr=84:dd:20:76:4a:ab pri_dev_type=1-0050F204-1 name='PEER_P2P' config_methods=0x108 dev_capab=0x25 group_capab=0x0 group=p2pgrp0 --P2P Peer trying to join group-- P2P-PROV-DISC-ENTER-PIN 5c:31:3e:d4:82:4f [intf : p2pdev0] p2p_connect 5c:31:3e:d4:82:4f 83987175 keypad join WPS authentication kicks off after this and group formation failure occurs. Is the above sequence right? -----Client Log----------- The following log occurs a few times before group formation failure p2pgrp0: Trying to associate with 5c:31:3e:d4:82:50 (SSID='DIRECT-qu' freq=2462 MHz) HOSTAPTIW _associate: enter, mode = 0 role 4 iface p2pgrp0 p2pgrp0: Associated with 5c:31:3e:d4:82:50 p2pgrp0: CTRL-EVENT-EAP-STARTED EAP authentication started p2pgrp0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=1 p2pgrp0: CTRL-EVENT-EAP-METHOD EAP vendor 14122 method 1 (WSC) selected p2pgrp0: WPS-M2D dev_password_id=0 config_error=15 p2pdev0: WPS-M2D dev_password_id=0 config_error=15 p2pgrp0: CTRL-EVENT-EAP-FAILURE EAP authentication failed p2pgrp0: CTRL-EVENT-DISCONNECTED bssid=5c:31:3e:d4:82:50 reason=3 locally_generated=1 p2pgrp0: Trying to associate with 5c:31:3e:d4:82:50 (SSID='DIRECT-qu' freq=2462 MHz) P2P-GROUP-FORMATION-FAILURE P2P-GROUP-REMOVED p2pgrp0 client reason=FORMATION_FAILED Regards, Sesh _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap