Failed to set channel for kernel driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 
I have been trying a few different things to get hostapd working with my wireless card. With ieee80211d/h off ACS attempts to use channel 149 (80 MHz wide) and prints out a message of "Could not set channel for kernel driver”. When I turn ieee80211d/h on the message I get is "Can't set freq params” and "DFS start_dfs_cac() failed, -1”. The DFS stuff seems to want to use channel 52. According to iw list both 52 and 149 are supported channels by my hardware.

I am using the ath10k driver with a Airetos AEX-QCA9880-NX wireless card. The full testing configuration I am attempting to use is below. Is there anything I am completely wrong on or could there be driver/firmware/hardware issues?  

interface=lan-wireless  
driver=nl80211
ssid=test
hw_mode=a
channel=0
ieee80211n=1
ieee80211ac=1
ieee80211d=0
ieee80211h=0
country_code=US
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
vht_oper_centr_freq_seg1_idx=159




--  
Matt Keeler  



_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux