Hi all, I have a setup where I'm running wpa_supplicant as an external registrar. When I perform a PBC using the wpa_gui I can connect to the network, but in the event history (see below) it looks like I get a failure first and the the connection is established. Is this normal behaviour? Kind regards Morten <3>CTRL-EVENT-SCAN-STARTED <3>CTRL-EVENT-SCAN-RESULTS <3>WPS-AP-AVAILABLE <3>CTRL-EVENT-SCAN-STARTED <3>CTRL-EVENT-SCAN-RESULTS <3>WPS-AP-AVAILABLE <3>CTRL-EVENT-SCAN-STARTED <3>CTRL-EVENT-SCAN-RESULTS <3>WPS-AP-AVAILABLE-PBC <3>SME: Trying to authenticate with c8:a7:0a:d2:30:4e (SSID='mbruun-5G' freq=5745 MHz) <3>Trying to associate with c8:a7:0a:d2:30:4e (SSID='mbruun-5G' freq=5745 MHz) <3>Associated with c8:a7:0a:d2:30:4e <3>CTRL-EVENT-EAP-STARTED EAP authentication started <3>CTRL-EVENT-EAP-STATUS status='started' parameter='' <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=1 <3>CTRL-EVENT-EAP-STATUS status='accept proposed method' parameter='WSC' <3>CTRL-EVENT-EAP-METHOD EAP vendor 14122 method 1 (WSC) selected <3>WPS-M2D dev_password_id=0 config_error=0 <3>WPS-CRED-RECEIVED <3>WPS-SUCCESS <3>CTRL-EVENT-EAP-STATUS status='completion' parameter='failure' <3>CTRL-EVENT-EAP-FAILURE EAP authentication failed <3>CTRL-EVENT-DISCONNECTED bssid=c8:a7:0a:d2:30:4e reason=3 locally_generated=1 <3>CTRL-EVENT-SCAN-STARTED <3>CTRL-EVENT-SCAN-RESULTS <3>WPS-AP-AVAILABLE-PBC <3>SME: Trying to authenticate with c8:a7:0a:d2:30:4e (SSID='mbruun-5G' freq=5745 MHz) <3>Trying to associate with c8:a7:0a:d2:30:4e (SSID='mbruun-5G' freq=5745 MHz) <3>Associated with c8:a7:0a:d2:30:4e <3>WPA: Key negotiation completed with c8:a7:0a:d2:30:4e [PTK=CCMP GTK=CCMP] <3>CTRL-EVENT-CONNECTED - Connection to c8:a7:0a:d2:30:4e completed [id=0 id_str=] > _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
