We are seeing a curious issue with wpa_supplicant (both version 1.0 and 2.5) where WLAN connectivity sometimes gets stuck until a "reassociate" command is issued. wpa_cli status does not indicate any problems as far as I can see (actual MAC and SSID info is x-ed out): # wpa_cli status Selected interface 'wlan0' bssid=xx:xx:xx:xx:xx:xx ssid=xxxxxxxxxxxxx id=3 mode=station pairwise_cipher=CCMP group_cipher=CCMP key_mgmt=WPA2-PSK wpa_state=COMPLETED ip_address=192.168.1.88 address=xx:xx:xx:xx:xx:xx The problem happens with no discernible pattern. Usually it takes hours or days before it appears. Sometimes the problem fixes itself, usually after a few hours. I'm not overly familiar with wpa_supplicant or WPA in general, so any tips for how to debug this further would be appreciated. Thanks and best regards, --david -- eGauge Systems LLC, http://egauge.net/, 1.877-EGAUGE1, fax 720.545.9768 _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap