On Sun, Dec 06, 2015 at 09:47:38PM +0100, Michael Braun wrote: > diff --git a/tests/hwsim/test_ap_vlan.py b/tests/hwsim/test_ap_vlan.py > +def test_ap_vlan_wpa2_radius_tagged(dev, apdev): > + """AP VLAN with WPA2-Enterprise and RADIUS EGRESS_VLANID attributes""" > + try: > + subprocess.call(['ip','link','add','link','wlan0','name','wlan0.1','type','vlan','id','1']) > + subprocess.call(['ifconfig','wlan0.1','up']) > + > + params = hostapd.wpa2_eap_params(ssid="test-vlan") > + params['dynamic_vlan'] = "1" > + params["vlan_naming"] = "1" > + hapd = hostapd.add_ap(apdev[0]['ifname'], params) > + > + dev[0].connect("test-vlan", key_mgmt="WPA-EAP", eap="PAX", > + identity="vlan1tagged", > + password_hex="0123456789abcdef0123456789abcdef", > + scan_freq="2412") > + > + hwsim_utils.run_connectivity_test(dev[0], hapd, 0, ifname1="wlan0.1", ifname2="brvlan1") As noted in the previous email, this fails for me.. That needs to be addressed before this test case can be added (and well, if there is something wrong in functionality, that functionality in the implementation would obviously need to be addressed as well). -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap