On Wed, Oct 28, 2015 at 11:00:05PM +0200, Jouni Malinen wrote: > On Fri, Oct 23, 2015 at 06:22:14PM +0530, Rajkumar Manoharan wrote: > > Add VHT transmit power envelope element defined in IEEE std > > 802.11ac-2013 8.4.2.164 for VHT bandwidth channel switch. > > Please note that this has been renamed to "Transmit Power Envelope > element" in REVmc (i.e., "VHT" removed from the name). > Will remove VHT in next version. Should I keep the spec. section as it is? [...] > > + /* > > + * Local Maximum Transmit power is encoded as 2's complement > > + * with a 0.5 dB step > > + */ > > + max_tx_power = ~(chan->max_tx_power * 2) + 1; > > + *eid++ = max_tx_power; > > + *eid++ = max_tx_power; > > + *eid++ = max_tx_power; > > Could you please clarify why all three values are set to the same value? > Would there be no case where the local maximum transmit power is > different for 20, 40, and 80 MHz channel cases? > Since I do not find per bandwidth max tx power, I used the channel max tx power for all bandwith. Is there a way to extract per-bw max tx power from regulatory. Please help. Will address your other comments in next version. -Rajkumar _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap