Hm ok, But if I do an: find -name gdk-pixbuf-csource I get gdk-pixbuf-csource in my toolchain under ../marvellf/usr/bin/gdk-pixbuf-csource So it seems that configure doesn`t have the right path. Or can`t find the tool when needed... Thanks and Best regards Dominik -----Ursprüngliche Nachricht----- Von: Maarten Bosmans [mailto:mkbosmans@xxxxxxxxx] Gesendet: Freitag, 5. August 2011 15:32 An: Dominik Schröder Cc: gtk-list Betreff: Re: trouble while cross-compiling gtk+-2.10.13 You have a missing gdk-pixbuf-csource http://git.gnome.org/browse/gtk+/tree/demos/Makefile.am?id=GTK_2_10_13#n46 Maarten 2011/8/5 Dominik Schröder <dominik.schroeder@xxxxxxxxxxxxxxxx>: > Hello Maarten > > Thanks for your reply. > > > At the moment I can compiles with the solution you have mentioned. (replace > demos from SUBDIRS). > > But I hope to find a better way... > > Best regards > > Dominik > > Am 05.08.2011 13:03, schrieb Maarten Bosmans: >> >> 2011/8/5 Dominik Schröder<dominik.schroeder@xxxxxxxxxxxxxxxx>: >>> >>> Hello Maarten >>> >>> I need this version, because the application is running in an industrial >>> environment. And unfortunately there we are fixed on most >>> software-versions. >>> >>> The output of ./configure unfortunately din`t gives me any more ideas... >>> :-( >> >> Well, you didn't post it so we cannot check for ourselves. >> >> Try figuring out which command was missing by inspecting the Makefile >> (or perhaps better Makefile.am) which command is missing. (which >> variable that is supposed to hold a command contains 'no') >> >> If all else fails, you can remove demos from SUBDIRS in the toplevel >> Makefile.am and rerun autogen.sh. >> >> Maarten >> >>> Thanks and >>> Best regards >>> >>> Dominik Schröder >>> >>> Am 05.08.2011 09:35, schrieb Maarten Bosmans: >>>> >>>> 2011/8/5 Dominik Schröder<dominik.schroeder@xxxxxxxxxxxxxxxx>: >>>>> >>>>> Hello list, >>>>> >>>>> at the moment I have some trouble while compiling gtk+-2.10.13 for an >>>>> ARM >>>>> processor. >>>> >>>> Why such an old version? You will find it easier to get support on >>>> this list if you at least try it with a current version. Chances are >>>> that any bugs you'll encounter in 2.10 are already fixed in a later >>>> version. >>>> >>>>> I think nearly at the end of the compile process there is a problem >>>>> with >>>>> the >>>>> demos. >>>>> One solution could be to compile without the demos, but I haven`t found >>>>> a >>>>> switch to turn of the demos. >>>>> >>>>> Eventually there is another more "perfect" solution for this problem. >>>>> >>>>> Here is my compile-output: >>>>> >>>>> ... >>>>> >>>>> Making all in demos >>>>> make[3]: Betrete Verzeichnis '/home/project/src/gtk+-2.10.13/demos' >>>>> no --raw --build-list \ >>>> >>>> Why is the no command used here? >>>> Probably the output of ./configure should tell you more. >>>> >>>>> apple_red ./apple-red.png \ >>>>> gnome_foot ./gnome-foot.png \ >>>>>> >>>>>> test-inline-pixbufs.h \ >>>>> >>>>> || (rm -f test-inline-pixbufs.h&& false) >>>>> /bin/bash: no: Command not found. >>>>> make[3]: *** [test-inline-pixbufs.h] Fehler 1 >>>>> make[3]: Verlasse Verzeichnis '/home/project/src/gtk+-2.10.13/demos' >>>>> make[2]: *** [all-recursive] Fehler 1 >>>>> make[2]: Verlasse Verzeichnis '/home/project/src/gtk+-2.10.13' >>>>> make[1]: *** [all] Fehler 2 >>>>> make[1]: Verlasse Verzeichnis '/home/project/src/gtk+-2.10.13' >>>>> make: *** [/home/project/src/gtk+-2.10.13/Makefile] Fehler 2 >>>>> >>>>> ... >>>>> >>>>> Thanks for any help! >>>>> >>>>> Best regards >>>>> >>>>> Dominik Schröder >>>> >>>> Maarten >>> > > > -- > Mit freundlichen Grüßen > > Dominik Schröder > B. Eng. > Entwicklung > > Wolfgang Bachleitner und Gunther Heugel Elektronik oHG > Boschstraße 20 > D-78655 Dunningen > > Tel.: +49 (0) 7403 - 9218 - 428 > Fax: +49 (0) 7403 - 9218 - 39 > E-Mail: dominik.schroeder@xxxxxxxxxxxxxxxx > > Registergericht: Stuttgart, HRA 471187 > Sitz der Gesellschaft: Dunningen > WEEE-Reg.-Nr.: DE 4653 7000 > > CONFIDENTIALITY : This e-mail and any attachments are confidential > and may be privileged. If you are not a named recipient, please notify the > sender immediately and do not disclose the contents to another person, > use it for any purpose or store or copy the information in any medium. > > _______________________________________________ gtk-list mailing list gtk-list@xxxxxxxxx http://mail.gnome.org/mailman/listinfo/gtk-list
