Re: Pango tab stops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ian,

Can you attach a self-contained test case please?

Thanks
behdad

On 04/24/2009 01:28 AM, Ian Puleston wrote:
-----Original Message-----
From: Behdad Esfahbod
Sent: Wednesday, April 08, 2009 3:30 PM

On 04/01/2009 07:27 PM, Ian Puleston wrote:
Hi,
Hi Ian,


I want to use a PangoTabArray to pass tab stop settings to a print
function
along with text to be sent to a printer. The idea is that the caller
passes
the pre-set PangoTabArray, and the print function then calls
pango_layout_set_tabs to add it to the PangoLayout created via
gtk_print_context_create_pango_layout.

But there seems to be a problem with setting the tabs correctly for
the
resolution (dpi) of the printer. With a PangoTabArray the tabs are
specified
in either pixels or Pango units, and to use either to set tag stops
at fixed
distances requires knowledge of the resolution of the device, but the
code
requesting the print cannot know that (the user has not even selected
a
printer yet).
No it doesn't.  The cairo PS/PDF/SVG surfaces use Postscript points as
their
device "pixel".  That is, for positioning purposes, 72dpi is all you
care
about.  The actual resolution of the printer printing them is
irrelevant.

Makes sense?

behdad


OK, sorry for the delay but I've now had a chance to try this and it doesn't seem to work as you say (or more likely I'm still doing something wrong). I set the tabs like this:

#define PANGO_CAIRO_INCHES(n) (n * 72 * PANGO_SCALE)

tabArray = pango_tab_array_new(5, FALSE);
pango_tab_array_set_tab(tabArray, 0, PANGO_TAB_LEFT, PANGO_CAIRO_INCHES(0.1));
pango_tab_array_set_tab(tabArray, 1, PANGO_TAB_LEFT, PANGO_CAIRO_INCHES(0.5));
pango_tab_array_set_tab(tabArray, 2, PANGO_TAB_LEFT, PANGO_CAIRO_INCHES(3.3));
pango_tab_array_set_tab(tabArray, 3, PANGO_TAB_LEFT, PANGO_CAIRO_INCHES(4.2));
pango_tab_array_set_tab(tabArray, 4, PANGO_TAB_LEFT, PANGO_CAIRO_INCHES(6.0));

And I set those tabs in the layout of the print context like this:
layout = gtk_print_context_create_pango_layout(context);
...
pango_layout_set_tabs(layout, (PangoTabArray*)pElem->data);

Then in the "draw-page" signal handler of the print operation I print lines from that layout one at a time like this:

cr = gtk_print_context_get_cairo_context(context);
layoutLine = pango_layout_get_line_readonly(layout, lineCnt);
pango_layout_line_get_extents(layoutLine,&inkRect,&logRect);
textHeight = (gdouble)logRect.height / PANGO_SCALE;
cairo_move_to(cr, currPos_x, currPos_y + textHeight);
pango_cairo_show_layout_line(cr, layoutLine);
currPos_y += textHeight;


So to test it I simply tried printing "\t|\t|\t|\t|\t|\n" to see where the tabs are at. Printing to a PDF (a 300dpi device) they cover about 1.5 inches total (should be 6 inches with the above tab stops), printing to an actual 600dpi printer they cover about 1 inch total.

I was previously setting the tabs in pixels (passing TRUE as the 2nd argument to pango_tab_array_new) and assuming a 300dpi device, and then inside the print function reading them, scaling them up and resaving them for the 600dpi printer, and although it was rather clumsy the positions came out correct.

So any idea what might be incorrect in the above code?

Ian



_______________________________________________
gtk-list mailing list
gtk-list@xxxxxxxxx
http://mail.gnome.org/mailman/listinfo/gtk-list

[Index of Archives]     [Touch Screen Library]     [GIMP Users]     [Gnome]     [KDE]     [Yosemite News]     [Steve's Art]

  Powered by Linux