On Sep 03, 2024 at 15:02:19 +0530, Ayush Singh wrote: > Add bootloader-backdoor-gpios which is required for enabling bootloader > backdoor for flashing firmware to cc1352p7. > > Also fix the incorrect reset-gpio. A Fixes tag please? > > Signed-off-by: Ayush Singh <ayush@xxxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > index 70de288d728e..a1cd47d7f5e3 100644 > --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts > @@ -888,7 +888,8 @@ &main_uart6 { > > mcu { > compatible = "ti,cc1352p7"; > - reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>; > + bootloader-backdoor-gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&main_gpio0 14 GPIO_ACTIVE_HIGH>; > vdds-supply = <&vdd_3v3>; Reviewed-by: Dhruva Gole <d-gole@xxxxxx> -- Best regards, Dhruva Gole Texas Instruments Incorporated _______________________________________________ greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx