Add DT bindings for mikroBUS interface. MikroBUS is an open standard
developed by MikroElektronika for connecting add-on boards to
microcontrollers or microprocessors.
Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx>
---
.../bindings/misc/mikrobus-connector.yaml | 110 ++++++++++++++++++
MAINTAINERS | 6 +
2 files changed, 116 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/mikrobus-connector.yaml
diff --git a/Documentation/devicetree/bindings/misc/mikrobus-connector.yaml b/Documentation/devicetree/bindings/misc/mikrobus-connector.yaml
new file mode 100644
index 000000000000..6eace2c0dddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/mikrobus-connector.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/mikrobus-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: mikroBUS add-on board socket
+
+maintainers:
+ - Ayush Singh <ayushdevel1325@xxxxxxxxx>
+
+properties:
+ compatible:
+ const: mikrobus-connector
+
+ pinctrl-0: true
+ pinctrl-1: true
+ pinctrl-2: true
+ pinctrl-3: true
+ pinctrl-4: true
+ pinctrl-5: true
+ pinctrl-6: true
+ pinctrl-7: true
+ pinctrl-8: true
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: pwm_default
+ - const: pwm_gpio
+ - const: uart_default
+ - const: uart_gpio
+ - const: i2c_default
+ - const: i2c_gpio
+ - const: spi_default
+ - const: spi_gpio
+
+ mikrobus-gpios:
+ minItems: 11
+ maxItems: 12
+
+ i2c-adapter:
+ description: i2c adapter attached to the mikrobus socket.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ spi-controller:
+ description: spi bus number of the spi-master attached to the mikrobus socket.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ uart:
+ description: uart port attached to the mikrobus socket
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ pwms:
+ description: the pwm-controller corresponding to the mikroBUS PWM pin.
+ maxItems: 1
+
+ spi-cs:
+ description: spi chip-select numbers corresponding to the chip-selects on the mikrobus socket.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: chip select corresponding to CS pin
+ - description: chip select corresponding to RST pin
+
+required:
+ - compatible
+ - pinctrl-0
+ - pinctrl-1
+ - pinctrl-2
+ - pinctrl-3
+ - pinctrl-4
+ - pinctrl-5
+ - pinctrl-6
+ - pinctrl-7
+ - pinctrl-8
+ - i2c-adapter
+ - spi-controller
+ - spi-cs
+ - uart
+ - pwms
+ - mikrobus-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ mikrobus-0 {
+ compatible = "mikrobus-connector";
+ status = "okay";
+ pinctrl-names = "default", "pwm_default", "pwm_gpio","uart_default", "uart_gpio", "i2c_default",
+ "i2c_gpio", "spi_default", "spi_gpio";
+ pinctrl-0 = <&P2_03_gpio_input_pin &P1_04_gpio_pin &P1_02_gpio_pin>;
+ pinctrl-1 = <&P2_01_pwm_pin>;
+ pinctrl-2 = <&P2_01_gpio_pin>;
+ pinctrl-3 = <&P2_05_uart_pin &P2_07_uart_pin>;
+ pinctrl-4 = <&P2_05_gpio_pin &P2_07_gpio_pin>;
+ pinctrl-5 = <&P2_09_i2c_pin &P2_11_i2c_pin>;
+ pinctrl-6 = <&P2_09_gpio_pin &P2_11_gpio_pin>;
+ pinctrl-7 = <&P1_12_spi_pin &P1_10_spi_pin &P1_08_spi_sclk_pin &P1_06_spi_cs_pin>;
+ pinctrl-8 = <&P1_12_gpio_pin &P1_10_gpio_pin &P1_08_gpio_pin &P1_06_gpio_pin>;
+ i2c-adapter = <&i2c1>;
+ spi-controller = <&spi1>;
+ spi-cs = <0 1>;
+ uart = <&uart1>;
+ pwms = <&ehrpwm1 0 500000 0>;
+ mikrobus-gpios = <&gpio1 18 0> , <&gpio0 23 0>, <&gpio0 30 0> , <&gpio0 31 0>, <&gpio0 15 0>,
+ <&gpio0 14 0>, <&gpio0 4 0> , <&gpio0 3 0>, <&gpio0 2 0>, <&gpio0 5 0>,
+ <&gpio2 25 0>, <&gpio2 3 0>;
+ };
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 375d34363777..69418a058c6b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14767,6 +14767,12 @@ M: Oliver Neukum <oliver@xxxxxxxxxx>
S: Maintained
F: drivers/usb/image/microtek.*
+MIKROBUS
+M: Ayush Singh <ayushdevel1325@xxxxxxxxx>
+M: Vaishnav M A <vaishnav@xxxxxxxxxxxxxxx>
+S: Maintained
+F: Documentation/devicetree/bindings/misc/mikrobus-connector.yaml
+
MIKROTIK CRS3XX 98DX3236 BOARD SUPPORT
M: Luka Kovacic <luka.kovacic@xxxxxxxxxx>
M: Luka Perkov <luka.perkov@xxxxxxxxxx>
--
2.44.0
_______________________________________________
greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx
To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx
|