Make gb-beagleplay greybus spec compliant by moving cport information to
transport layer instead of using `header->pad` bytes.
Greybus HDLC frame now has the following payload:
1. le16 cport
2. gb_operation_msg_hdr msg_header
3. u8 *msg_payload
Fixes: ec558bbfea67 ("greybus: Add BeaglePlay Linux Driver")
Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx>
---
drivers/greybus/gb-beagleplay.c | 55 ++++++++++++++++++++++++---------
1 file changed, 41 insertions(+), 14 deletions(-)
diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c
index 1e70ff7e3da4..82dc8a25e6b9 100644
--- a/drivers/greybus/gb-beagleplay.c
+++ b/drivers/greybus/gb-beagleplay.c
@@ -85,17 +85,31 @@ struct hdlc_payload {
void *buf;
};
+/**
+ * struct hdlc_greybus_frame - Structure to represent greybus HDLC frame payload
+ *
+ * @cport: cport id
+ * @hdr: greybus operation header
+ * @payload: greybus message payload
+ *
+ * The HDLC payload sent over UART for greybus address has cport preappended to greybus message
+ */
+struct hdlc_greybus_frame {
+ __le16 cport;
+ struct gb_operation_msg_hdr hdr;
+ u8 payload[];
+} __packed;
+
static void hdlc_rx_greybus_frame(struct gb_beagleplay *bg, u8 *buf, u16 len)
{
- u16 cport_id;
- struct gb_operation_msg_hdr *hdr = (struct gb_operation_msg_hdr *)buf;
-
- memcpy(&cport_id, hdr->pad, sizeof(cport_id));
+ struct hdlc_greybus_frame *gb_frame = (struct hdlc_greybus_frame *)buf;
+ u16 cport_id = le16_to_cpu(gb_frame->cport);
+ u16 gb_msg_len = le16_to_cpu(gb_frame->hdr.size);
dev_dbg(&bg->sd->dev, "Greybus Operation %u type %X cport %u status %u received",
- hdr->operation_id, hdr->type, le16_to_cpu(cport_id), hdr->result);
+ gb_frame->hdr.operation_id, gb_frame->hdr.type, cport_id, gb_frame->hdr.result);
- greybus_data_rcvd(bg->gb_hd, le16_to_cpu(cport_id), buf, len);
+ greybus_data_rcvd(bg->gb_hd, cport_id, (u8 *)&gb_frame->hdr, gb_msg_len);
}
static void hdlc_rx_dbg_frame(const struct gb_beagleplay *bg, const char *buf, u16 len)
@@ -336,10 +350,23 @@ static struct serdev_device_ops gb_beagleplay_ops = {
.write_wakeup = gb_tty_wakeup,
};
+/**
+ * gb_message_send() - Send greybus message using HDLC over UART
+ *
+ * @hd: pointer to greybus host device
+ * @cport: AP cport where message originates
+ * @msg: greybus message to send
+ * @mask: gfp mask
+ *
+ * Greybus HDLC frame has the following format:
+ * 1. le16 cport
+ * 2. gb_operation_msg_hdr msg_header
+ * 3. u8 *msg_payload
+ */
static int gb_message_send(struct gb_host_device *hd, u16 cport, struct gb_message *msg, gfp_t mask)
{
struct gb_beagleplay *bg = dev_get_drvdata(&hd->dev);
- struct hdlc_payload payloads[2];
+ struct hdlc_payload payloads[3];
__le16 cport_id = le16_to_cpu(cport);
dev_dbg(&hd->dev, "Sending greybus message with Operation %u, Type: %X on Cport %u",
@@ -348,14 +375,14 @@ static int gb_message_send(struct gb_host_device *hd, u16 cport, struct gb_messa
if (le16_to_cpu(msg->header->size) > RX_HDLC_PAYLOAD)
return dev_err_probe(&hd->dev, -E2BIG, "Greybus message too big");
- memcpy(msg->header->pad, &cport_id, sizeof(cport_id));
-
- payloads[0].buf = msg->header;
- payloads[0].len = sizeof(*msg->header);
- payloads[1].buf = msg->payload;
- payloads[1].len = msg->payload_size;
+ payloads[0].buf = &cport_id;
+ payloads[0].len = sizeof(cport_id);
+ payloads[1].buf = msg->header;
+ payloads[1].len = sizeof(*msg->header);
+ payloads[2].buf = msg->payload;
+ payloads[2].len = msg->payload_size;
- hdlc_tx_frames(bg, ADDRESS_GREYBUS, 0x03, payloads, 2);
+ hdlc_tx_frames(bg, ADDRESS_GREYBUS, 0x03, payloads, 3);
greybus_message_sent(bg->gb_hd, msg, 0);
return 0;
--
2.43.0
_______________________________________________
greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx
To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx
|