The BeaglePlay board by BeagleBoard.org has a CC1352P7 co-processor connected to the main AM62 (running Linux) over UART. In the BeagleConnect Technology, CC1352 is responsible for handling 6LoWPAN communication with beagleconnect freedom nodes as well as their discovery. This mcu is used by gb-beagleplay, a Greybus driver for BeaglePlay. Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx> --- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 7cfdf562b53b..d2e0b11242b6 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -870,6 +870,12 @@ &main_uart6 { pinctrl-names = "default"; pinctrl-0 = <&wifi_debug_uart_pins_default>; status = "okay"; + + mcu { + compatible = "ti,cc1352p7"; + reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>; + vdds-supply = <&vdd_3v3>; + }; }; &dss { -- 2.41.0 _______________________________________________ greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx