On Tue, Apr 12, 2022 at 06:56:12AM +0200, Greg Kroah-Hartman wrote:
> On Mon, Apr 11, 2022 at 05:14:11PM -0400, Jaehee Park wrote:
> > Zero-length and one-element arrays are deprecated. Flexible-array
> > members should be used instead. Flexible-array members are
> > recommended because this is the way the kernel expects dynamically
> > sized trailing elements to be declared.
> > Refer to Documentation/process/deprecated.rst.
> >
> > Change the zero-length array, buf, in the struct
> > gb_usb_hub_control_response to a flexible array. And add wLength as a
> > member of the struct so that the struct is not a zero-sized struct.
> >
> > Issue found by flexible_array coccinelle script.
> >
> > Signed-off-by: Jaehee Park <jhpark1013@xxxxxxxxx>
> > ---
> >
> > I have a question for the authors:
> > I saw a fixme comment in the hub_control function in usb.c:
> > / FIXME: handle unspecified lengths /
> >
> > I was wondering why this comment was left there?
> >
> > In this patch, I'm using this struct:
> >
> > struct gb_usb_hub_control_response {
> > __le16 wLength;
> > u8 buf[];
> > };
> >
> > And instead of using response_size, I'm doing this:
> >
> > struct gb_usb_hub_control_response *response;
> > And using sizeof(*response) as the input to gb_operation_create.
> >
> > Would the flexible array address the handling of unspecified lengths
> > issue (in the fixme comment)?
>
> No, you can not change the format of the data on the bus without also
> changing the firmware in the device and usually the specification as
> well.
>
> > drivers/staging/greybus/usb.c | 7 +++----
> > 1 file changed, 3 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/staging/greybus/usb.c b/drivers/staging/greybus/usb.c
> > index 8e9d9d59a357..d0b2422401df 100644
> > --- a/drivers/staging/greybus/usb.c
> > +++ b/drivers/staging/greybus/usb.c
> > @@ -27,7 +27,8 @@ struct gb_usb_hub_control_request {
> > };
> >
> > struct gb_usb_hub_control_response {
> > - u8 buf[0];
> > + __le16 wLength;
> > + u8 buf[];
>
> What is wrong with buf[0] here?
>
> You can fix this in other ways if you really understand the difference
> between [0] and [] in C. Please look at many of the other conversions
> if you wish to do this.
And I would not recommend this as an "outreachy introduction task"
unless you understand this. There are much easier first patch tasks you
can accomplish instead.
good luck!
greg k-h
_______________________________________________
greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx
To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx
|