On 5/14/21 10:56 AM, Joe Perches wrote:
On Fri, 2021-05-14 at 17:30 +0200, Greg KH wrote:On Fri, May 14, 2021 at 08:42:16PM +0530, Shreyansh Chouhan wrote:[]I didn't look at how/where was the macro called and missed a very obvious error. Now that I have looked at it, the only way I can think of fixing this is changing the macro to a (inline?) function. Will that be a desirable change?No, it can't be a function, the code is fine as-is, checkpatch is just a perl script and does not always know what needs to be done.true. perhaps better though to rename these declaring macros to start with declare_
I don't disagree with your suggestion, but it's not clear it would have prevented submission of the erroneous initial patch (nor future ones from people who blindly follow checkpatch.pl suggestions). -Alex PS Lots of negatives in that sentence.
Something like this: (with miscellaneous realigning of the macros line ending continuations \) --- drivers/staging/greybus/loopback.c | 72 +++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 36 deletions(-) diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c index 2471448ba42a..dc399792f35f 100644 --- a/drivers/staging/greybus/loopback.c +++ b/drivers/staging/greybus/loopback.c @@ -119,18 +119,18 @@ module_param(kfifo_depth, uint, 0444); #define GB_LOOPBACK_US_WAIT_MAX 1000000/* interface sysfs attributes */-#define gb_loopback_ro_attr(field) \ -static ssize_t field##_show(struct device *dev, \ +#define declare_gb_loopback_ro_attr(field) \ +static ssize_t field##_show(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ struct gb_loopback *gb = dev_get_drvdata(dev); \ - return sprintf(buf, "%u\n", gb->field); \ + return sprintf(buf, "%u\n", gb->field); \ } \ static DEVICE_ATTR_RO(field)-#define gb_loopback_ro_stats_attr(name, field, type) \-static ssize_t name##_##field##_show(struct device *dev, \ +#define declare_gb_loopback_ro_stats_attr(name, field, type) \ +static ssize_t name##_##field##_show(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ @@ -142,8 +142,8 @@ static ssize_t name##_##field##_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(name##_##field)-#define gb_loopback_ro_avg_attr(name) \-static ssize_t name##_avg_show(struct device *dev, \ +#define declare_gb_loopback_ro_avg_attr(name) \ +static ssize_t name##_avg_show(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ @@ -151,8 +151,8 @@ static ssize_t name##_avg_show(struct device *dev, \ struct gb_loopback *gb; \ u64 avg, rem; \ u32 count; \ - gb = dev_get_drvdata(dev); \ - stats = &gb->name; \ + gb = dev_get_drvdata(dev); \ + stats = &gb->name; \ count = stats->count ? stats->count : 1; \ avg = stats->sum + count / 2000000; /* round closest */ \ rem = do_div(avg, count); \ @@ -162,12 +162,12 @@ static ssize_t name##_avg_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(name##_avg)-#define gb_loopback_stats_attrs(field) \- gb_loopback_ro_stats_attr(field, min, u); \ - gb_loopback_ro_stats_attr(field, max, u); \ - gb_loopback_ro_avg_attr(field) +#define declare_gb_loopback_stats_attrs(field) \ + declare_gb_loopback_ro_stats_attr(field, min, u); \ + declare_gb_loopback_ro_stats_attr(field, max, u); \ + declare_gb_loopback_ro_avg_attr(field)-#define gb_loopback_attr(field, type) \+#define declare_gb_loopback_attr(field, type) \ static ssize_t field##_show(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ @@ -193,8 +193,8 @@ static ssize_t field##_store(struct device *dev, \ } \ static DEVICE_ATTR_RW(field)-#define gb_dev_loopback_ro_attr(field, conn) \-static ssize_t field##_show(struct device *dev, \ +#define declare_gb_dev_loopback_ro_attr(field, conn) \ +static ssize_t field##_show(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ @@ -203,7 +203,7 @@ static ssize_t field##_show(struct device *dev, \ } \ static DEVICE_ATTR_RO(field)-#define gb_dev_loopback_rw_attr(field, type) \+#define declare_gb_dev_loopback_rw_attr(field, type) \ static ssize_t field##_show(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ @@ -223,7 +223,7 @@ static ssize_t field##_store(struct device *dev, \ if (ret != 1) \ len = -EINVAL; \ else \ - gb_loopback_check_attr(gb); \ + gb_loopback_check_attr(gb); \ mutex_unlock(&gb->mutex); \ return len; \ } \ @@ -268,26 +268,26 @@ static void gb_loopback_check_attr(struct gb_loopback *gb) }/* Time to send and receive one message */-gb_loopback_stats_attrs(latency); +declare_gb_loopback_stats_attrs(latency); /* Number of requests sent per second on this cport */ -gb_loopback_stats_attrs(requests_per_second); +declare_gb_loopback_stats_attrs(requests_per_second); /* Quantity of data sent and received on this cport */ -gb_loopback_stats_attrs(throughput); +declare_gb_loopback_stats_attrs(throughput); /* Latency across the UniPro link from APBridge's perspective */ -gb_loopback_stats_attrs(apbridge_unipro_latency); +declare_gb_loopback_stats_attrs(apbridge_unipro_latency); /* Firmware induced overhead in the GPBridge */ -gb_loopback_stats_attrs(gbphy_firmware_latency); +declare_gb_loopback_stats_attrs(gbphy_firmware_latency);/* Number of errors encountered during loop */-gb_loopback_ro_attr(error); +declare_gb_loopback_ro_attr(error); /* Number of requests successfully completed async */ -gb_loopback_ro_attr(requests_completed); +declare_gb_loopback_ro_attr(requests_completed); /* Number of requests timed out async */ -gb_loopback_ro_attr(requests_timedout); +declare_gb_loopback_ro_attr(requests_timedout); /* Timeout minimum in useconds */ -gb_loopback_ro_attr(timeout_min); +declare_gb_loopback_ro_attr(timeout_min); /* Timeout minimum in useconds */ -gb_loopback_ro_attr(timeout_max); +declare_gb_loopback_ro_attr(timeout_max);/** Type of loopback message to send based on protocol type definitions @@ -297,21 +297,21 @@ gb_loopback_ro_attr(timeout_max); * payload returned in response) * 4 => Send a sink message (message with payload, no payload in response) */ -gb_dev_loopback_rw_attr(type, d); +declare_gb_dev_loopback_rw_attr(type, d); /* Size of transfer message payload: 0-4096 bytes */ -gb_dev_loopback_rw_attr(size, u); +declare_gb_dev_loopback_rw_attr(size, u); /* Time to wait between two messages: 0-1000 ms */ -gb_dev_loopback_rw_attr(us_wait, d); +declare_gb_dev_loopback_rw_attr(us_wait, d); /* Maximum iterations for a given operation: 1-(2^32-1), 0 implies infinite */ -gb_dev_loopback_rw_attr(iteration_max, u); +declare_gb_dev_loopback_rw_attr(iteration_max, u); /* The current index of the for (i = 0; i < iteration_max; i++) loop */ -gb_dev_loopback_ro_attr(iteration_count, false); +declare_gb_dev_loopback_ro_attr(iteration_count, false); /* A flag to indicate synchronous or asynchronous operations */ -gb_dev_loopback_rw_attr(async, u); +declare_gb_dev_loopback_rw_attr(async, u); /* Timeout of an individual asynchronous request */ -gb_dev_loopback_rw_attr(timeout, u); +declare_gb_dev_loopback_rw_attr(timeout, u); /* Maximum number of in-flight operations before back-off */ -gb_dev_loopback_rw_attr(outstanding_operations_max, u); +declare_gb_dev_loopback_rw_attr(outstanding_operations_max, u);static struct attribute *loopback_attrs[] = {&dev_attr_latency_min.attr,
_______________________________________________ greybus-dev mailing list greybus-dev@xxxxxxxxxxxxxxxx https://lists.linaro.org/mailman/listinfo/greybus-dev
|