On Thu, 2002-04-11 at 02:14, Gunnar Wagenknecht (gpm) wrote: > Hi! > > I've read through the archive and found some problem reports from Troy > Schultz. I experienced similar problems. > > My configuration: > - Compaq Presario Notebook 2700GR > - ATI Readon Mobility, 32MB > - P III mobile 1066 MHz, 20GB HD, 256 MB RAM > - Synaptics Touchpad with 4D scroll button (Firmware 5.8 reported by > gpm) > - Redhat 7.2 > - XFree 4.2.0 > - Kernel 2.4.18 with ACPI patches. My Presario 2710 is running Kernel 2.4.17 and ACPI patches 20020225, also my video memory is only 16MB. Expect for some minot differences are systems should be almost the same. I now have things on my system quite stable including the use of gpm. I have no more problems with switch consoles and my touchpad seems very stable. I recently found that my problems with X hanging after switching consoles was caused by a conflict between ACPI and agpgart support in the kernel. I removed the agpgart support and recompiled the kernel and everything is fine. I really did not need the agpgart since I don't do much 3D stuff on my notebook and I would rather have a stable mouse and keyboard. What version of the ACPI patches are you running? Have you made any changes to correct for problems with the ACPI Bios (DSDT) in your system? If at all possible please email me a copy of your dmesg output. I will try to help resolve the problems.