Re: can I map a "number" for an unregistered endpoint?

Bo Xu <boxuscience@xxxxxxxxx> · Tue, 13 Sep 2016 14:12:24 -0400

sorry I forgot to  introduce that the terminal I am using is Polycom-PVX(8.0.16),  when I try to call GnuGK-IP##permanent-Alias, then wireshark shows the folowing:
got admissionConfirm
then terminal send out setup-message,  in this setup-message, Called Party Number in Q.931 is the permanent-Alias, and this permanent-Alias is also in H.225's destinationAddress's dialledDigits
the calll is not successful; if I change it to "GnuGK-IP##active-register-Alias", then the call is successful.

do I need to set some parameters in gatekeeper.ini so I can call both register-Alias and permanent-Alias with "##"? Thanks!

Regards,
Bo

On Tue, Sep 13, 2016 at 9:49 AM, Bo Xu <boxuscience@xxxxxxxxx> wrote:
Hi Sergey,

Thanks for the info!    yes alias@IP and IP##alias are implemented by different vendors, my question is about how to use them in GnuGK for permanent-Alias and registered-Alias, i.e:

I can use "GnuGK-IP##registered-Alias" to call a terminal which is registered to GnuGK
but I cannot use "GnuGK-IP##permanent-Alias" to call a terminal which is not registered to GnuGK but I set a permanent-Alias for it (but I can use permanent-Alias@GnuGK-IP to call it)

because I want to use "GnuGK-IP##Alias" to call both registered-Alias and permanent-Alias Thanks!

Regards,
Bo

Hi Bo!

I think there is some misunderstanding: the "aaa@..." and "bbb##aaa" 
notations are the same thing, implemented by different vendors.

For example: to call "aaa" on "bbb" from Cisco codec, I should use 
"aaa@..." form and to call the same device on the same gatekeeper I'm 
using "bbb##aaa" form for Sony codecs.

If you want I can attach my configuration.

Kind regards, Sergey.

Tune-IT Logo
 http://www.tune-it.ru
tel: +7(812)3254440
Sergey.Zhmylove@...
12.09.2016 23:33, Bo Xu пишет:
> Hi Jan,
>
> I can call a permanent-Alias with the following "@" command:> permanent-Alias@...
>
> also I can call a register-Alias(a terminal who registered to my 
> GnuGK) with the following "##" command:
> GnuGKIP##registered-Alias
>
> but I cannot call permanent-Alias with the above "##" command,  cold 
> you tell me how I can call a permanent-Alias with "##" like 
> "GnuGKIP##permanent-Alias"? Thanks!
>
>
> Regards,
> Bo
>

On Mon, Sep 12, 2016 at 4:33 PM, Bo Xu <boxuscience@xxxxxxxxx> wrote:
Hi Jan,

I can call a permanent-Alias with the following "@" command:
permanent-Alias@GnuGKIP

also I can call a register-Alias(a terminal who registered to my GnuGK) with the following "##" command:
GnuGKIP##registered-Alias

but I cannot call permanent-Alias with the above "##" command,  cold you tell me how I can call a permanent-Alias with "##" like "GnuGKIP##permanent-Alias"? Thanks!

Regards,
Bo

On Wed, Aug 31, 2016 at 1:25 PM, Bo Xu <boxuscience@xxxxxxxxx> wrote:
Hi Jan,

yes I added "[RasSrv::PermanentEndpoints]" you mentioned into my gatekeeper.ini and it works fine now, Thanks a lot!

Regards,
Bo

Hi Bo,

GnuGk calls those endpoints that don't actively register "permanent
endpoints":

[RasSrv::PermanentEndpoints]
10.1.11.116=8000

Regards,
Jan

-- 
Jan Willamowius, Founder of the GNU Gatekeeper Project
EMail  : jan@...
Website: http://www.gnugk.org
Support: http://www.willamowius.com/gnugk-support.html

Relaxed Communications GmbH
Frahmredder 91
22393 Hamburg
Geschäftsführer: Jan Willamowius
HRB 125261 (Amtsgericht Hamburg)
USt-IdNr: DE286003584

Bo Xu wrote:
> Hi,
> 
> if I have a endpoint whose IP is 10.1.11.116, but it is not registered to
> my GnuGK, in this case, can I set the gatekeeper.ini so GnuGK can "map"
> that endpoint's IP(10.1.11.116) to an "number"(for example 8000), then
> later on when I want to call that endpoint I will call GnuGK like
> "GnuGKIP##8000"?
> 
> can I do the above with GnuGK? or I must register that endpoint to GnuGK
> then after that I can call it with "GnuGKIP##Alias"? Thanks!
> 
> Regards,
> Bo Xu

------------------------------------------------------------------------------
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/