Hi Sébastien, yes, thats supported. You can connect 2 GnuGks and tunnel media for all calls combined on just 2 ports. Regards, Jan -- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : jan@xxxxxxxxxxxxxx Website: http://www.gnugk.org Support: http://www.willamowius.com/gnugk-support.html Relaxed Communications GmbH Frahmredder 91 22393 Hamburg Geschäftsführer: Jan Willamowius HRB 125261 (Amtsgericht Hamburg) USt-IdNr: DE286003584 Sébastien Bonnaire wrote: > Hi Jan, > > Does it mean that the RTP Multiplexing is supporting between two GnuGK > using H.460 Traversal Server / Client feature ? > > Sebastien > > > 2015-08-26 18:15 GMT+02:00 Bo Xu <boxuscience@xxxxxxxxx>: > > > > > got it Thanks Jan! > > > > Regards, > > Bo Xu > > > > > > > > > > Hi, > > > > RTP multiplexing is a feature that needs H.460.18/.19. When you enable > > it, endpoints using H.460.19 may use it. Unfortunately not all > > endpoints support the feature, but the presence of multiplexing support > > is auto-detected. > > > > 3000 and 3001 are the ports used by GnuGk to receive multiplexed RTP. > > The endpoints that the endpoint are using (through the NAT) are > > auto-detected. > > > > The additional load for GnuGk is minimal. > > > > Regards, > > Jan > > > > -- > > Jan Willamowius, Founder of the GNU Gatekeeper Project > > EMail : jan@... > > Website: http://www.gnugk.org > > Support: http://www.willamowius.com/gnugk-support.html > > > > Relaxed Communications GmbH > > Frahmredder 91 > > 22393 Hamburg > > Geschäftsführer: Jan Willamowius > > HRB 125261 (Amtsgericht Hamburg) > > USt-IdNr: DE286003584 > > > > > > > > > > > > On Wed, Aug 26, 2015 at 10:18 AM, Bo Xu <boxuscience@xxxxxxxxx> wrote: > > > >> Hi, > >> > >> I have a GnuGK and several video terminals(like VT-A, VT-B and VT-C) in > >> their own different networks in other cities, and I set my gatekeeper.ini > >> as the following: > >> ... > >> RTPMultiplexing=1 > >> RTPMultiplexPort=3000 > >> RTCPMultiplexPort=3001 > >> ... > >> > >> in this case will all the terminals send multiplrxcing stream to the same > >> 3000/3001 port of my GnuGk? or every terminal will use 3000/3001 to send > >> its multiplexing stream? 3000/3001 is the port used by every terminal or > >> used by my GnuGk? > >> > >> and if I enable RTPMultiplexing, will it increase the GnuGk's work so > >> GnkGk will need more CPU power? Thanks! > >> > >> Regards, > >> Bo Xu ------------------------------------------------------------------------------ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
