I will try to test your config today.
Thanks so far...
-- op
On 1. Juli 2015 02:14:59 MESZ, openh323gk-users-request@xxxxxxxxxxxxxxxxxxxxx wrote:
Date: Wed, 01 Jul 2015 00:14:36 +0000
From: Robert Edeker <idxman01@xxxxxxxxx>
Subject: Re: [Openh323gk-users] gnugk behind router problem
To: GNU Gatekeeper Users <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
Message-ID:
<CANVo9ar_LyfreACXvM6Sff_bYg5-eHvU5zjD+MDbSrMJmUZzyw@xxxxxxxxxxxxxx>
Content-Type: text/plain; charset="utf-8"
Hi Oliver,
I agree with Jan as it does add more complexity and moving parts to the
equation. However, this is the route we took in May/June and it's working
well. [so far]
I'm certainly not an expert on h323 or networking, but you may want to try
removing ExternalIP from the config. gnugk cannot bind to a network
adapter with that address which i believe I had issues with as well.
Also, is there anything in front of EndPoint A that would cause issues?
My config is similar, though very minimal for the most part.
Is effectively the below settings, via [ModeSelection] based on IP.
[RoutedMode]
GKRouted=1
CallSignalPort=1720
H245Routed=1
AcceptUnregisteredCalls=1
AcceptNeighborsCalls=1
[RoutingPolicy]
default=explicit,internal,enum,srv,dns,internal,parent,neighbor
[Proxy]
Enable=0
;;;(certain IP's are proxied due to how a neighbor gatekeeper operates,
etc..)
Everything else is for routing prefixes to openmcu, logging and accounting.
Though I will say that I did try quite a few other settings especially with
hardcoding port ranges. Ultimately I did not go this route since the
firewall was smart enough to handle h323 and forward only the required
ports per call. I didn't want a number of blocks sitting out there in the
open being ported in. You may or may not be able to go this route, check
the router.
Only TCP 1720, 1503 and UDP 1719 go in directly. (thinking I can remove
1503 as well)
We may change this down the road and put gnugk to the side of the firewall,
but it probably won't be anytime soon.
**********************
------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/
_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
