Hi Thomas, using signaling routing but not H.245 routing is quite common, even so I wouldn't suggest using it in many cases. In this config all Q.931 (Setup, Connect etc.) messages are routed through the gatekeeper, but unless the endpoint negotiate H.245 tunneling, they will establish a direct TCP connection for H.245 (TerminalCapabilitySet, OpenLogicalChannel etc.). This work well unless there is a firewall blocking the direct connection... Regards, Jan Thomas Baerecke wrote: > Hello everyone, > > I was wondering what the meaning would be of a gatekeeper configuration > with GKRoutedMode=1, but without H245Routed (or with H245Routed set > explicitly to 0). Are there any control signals routed through the > gatekeeper (and if yes which ones) or does the communication happen > between the endpoints directly in that case? > > Thanks a lot for your help. > > Best regards, > > Thomas -- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : jan@xxxxxxxxxxxxxx Website: http://www.gnugk.org Support: http://www.willamowius.com/gnugk-support.html Relaxed Communications GmbH Frahmredder 91 22393 Hamburg Geschäftsführer: Jan Willamowius HRB 125261 (Amtsgericht Hamburg) USt-IdNr: DE286003584 ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
