Hi,
can you take one of the provided executables ? That would probably be
the easiest. Or use H323Plus from CVS.
Regards,
Jan
András Kovács wrote:
> Hi Jan,
>
> Thanks for your answer. I would start testing immediately, but some strange error with h323plus compilation occurs. Any idea:
>
> [CC] h323ep.cxx
> In file included from h323ep.cxx:67:
> /home/akovacs/temp/h323plus/include/h460/h460_std23.h:55:3: warning: #warning ("H.460.23 Compile issue with PTLib object.h/cxx SVN r26772 revert both files to r26754")
> In file included from h323ep.cxx:67:
> /home/akovacs/temp/h323plus/include/h460/h460_std23.h: In member function 'virtual PObject::Comparison PNatMethod_H46024::CompareObjectMemoryDirect(const PObject&) const':
> /home/akovacs/temp/h323plus/include/h460/h460_std23.h:66: error: 'PObject' is an ambiguous base of 'PNatMethod_H46024'
> /home/akovacs/temp/ptlib/include/ptlib/sound.h: At global scope:
> /home/akovacs/temp/ptlib/include/ptlib/sound.h:787: warning: 'PPlugin_PSoundChannel_WAVFile_loader' defined but not used
> /home/akovacs/temp/ptlib/include/ptlib/videoio.h:1168: warning: 'PPlugin_PVideoInputDevice_FakeVideo_loader' defined but not used
> /home/akovacs/temp/ptlib/include/ptlib/videoio.h:1175: warning: 'PPlugin_PVideoInputDevice_FFMPEG_loader' defined but not used
> /home/akovacs/temp/ptlib/include/ptlib/videoio.h:1179: warning: 'PPlugin_PVideoInputDevice_YUVFile_loader' defined but not used
> /home/akovacs/temp/h323plus/include/h460/h460_std9.h:113: warning: 'PPlugin_H460_Feature_Std9_loader' defined but not used
> /home/akovacs/temp/h323plus/include/h460/h460_std18.h:98: warning: 'PPlugin_H460_Feature_Std18_loader' defined but not used
> /home/akovacs/temp/h323plus/include/h460/h460_std18.h:159: warning: 'PPlugin_H460_Feature_Std19_loader' defined but not used
> /home/akovacs/temp/h323plus/include/h460/h46018_h225.h:416: warning: 'PPlugin_PNatMethod_H46019_loader' defined but not used
> /home/akovacs/temp/h323plus/include/h460/h460_std23.h:196: warning: 'PPlugin_H460_Feature_Std23_loader' defined but not used
> /home/akovacs/temp/h323plus/include/h460/h460_std23.h:280: warning: 'PPlugin_H460_Feature_Std24_loader' defined but not used
> /home/akovacs/temp/h323plus/include/h460/h460_oid3.h:167: warning: 'PPlugin_H460_Feature_OID3_loader' defined but not used
> /home/akovacs/temp/h323plus/include/gnugknat.h:282: warning: 'PPlugin_PNatMethod_GnuGk_loader' defined but not used
> /home/akovacs/temp/ptlib/include/ptlib/pluginmgr.h:175: warning: 'PFactoryLoader::PluginLoaderStartup_loader' defined but not used
> /home/akovacs/temp/ptlib/include/ptclib/pnat.h:362: warning: 'PFactoryLoader::PSTUNClient_loader' defined but not used
> make[2]: *** [/home/akovacs/temp/h323plus/lib/obj_s/h323ep.o] Error 1
> make[2]: Leaving directory `/home/akovacs/temp/h323plus-1.24.0/src'
> make[1]: *** [optnoshared] Error 2
> make[1]: Leaving directory `/home/akovacs/temp/h323plus-1.24.0/src'
> make: *** [optnoshared] Error 2
>
> I use ptlib 2.10.6 as suggesten on gnugk.org. My options and make params are these:
>
> ./configure --enable-h350 --enable-h460 --enable-h46018 --enable-h46023 --enable-h460p
> make bothdepend
> make bothnoshared
>
> Thanks.
>
> Andras
>
> -----Original Message-----
> From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx]
> Sent: Friday, August 31, 2012 6:01 PM
> To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Subject: Re: Cisco MCU and Content Server strange H.239 operation with GnuGK
>
> Hi,
>
> please try again using the just released 3.1 version. There is at least one bugfix that affected H.239 in conjunction with H.460.19.
> (And for security reasons you should update anyway.)
>
> Regards,
> Jan
>
> András Kovács wrote:
> > Hi All,
> >
> >
> > I wonder if you could advise me if GnuGK can do anything about the below problem.
> >
> > I have a Cisco 45xx MCU and a Cisco TCS (Content Server) registered to my GnuGK 3.0.2. MCU is registered as a gateway, TCS as a terminal. I use routed signalling, but H.245 is not routed.
> >
> > When starting an MCU conference recording with TCS H.239 channel is not established for all call scenarios and seemingly it depends on calling alias or IP or enabling/disabling GnuGK registration. Here are my scenarios:
> >
> > Both MCU and TCS is registered to GnuGK:
> >
> > Call from MCU to TCS:
> > - I call IP address: H.239: on
> > - I call TCS alias: H.239: off
> >
> > Call from TCS to MCU:
> > - I call IP address: H.239: off
> > - I call alias: H.239: off
> >
> > Then I remove TCS from my gatekeeper and repeat the calls. This happens:
> >
> > Call from TCS to MCU:
> > H.239: on
> >
> > Call from MCU to TCS:
> > H.239: on
> >
> > This is somewhat strange to me, as the gatekeeper should not do anything with H.239 channel that is set up between the two remote parties directly...
> >
> > I wonder if I could check anything on GnuGK side. I also opened a support ticket at Cisco.
> >
> > Thanks.
> >
> > Best regards,
> > Andras Kovacs
--
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
