Hi,
I am trying to register a GnuGK instance to a Tandberg Border Controller as an Endpoint; the plan is for this to act as a proxy into a larger partner installation.
I have set this up as:
[Endpoint]
Gatekeeper=192.168.1.31
Type=Terminal
H323ID=MyGate
E164=496912345
Password=
I do get, however, a reject from the BC:
gatekeeperReject {
requestSeqNum = 1
protocolIdentifier = 0.0.8.2250.0.5
rejectReason = neededFeatureNotSupported <<null>>
}
Now, checking the documentation of the BC, I find this statement:
> Note: Only traversal-enabled endpoints can register with a TANDBERG Border Controller. All other
> registration requests will be rejected. Traversal-enabled endpoints include all TANDBERG
> Expressway endpoints and third party endpoints which support the ITU H.460.18 and
> H.460.19 standards.
So it seems that GnuGK is not using and/or advertising either the Tandberg ASSENT protocol or H.460.18 during registration.
Is there any way this can be enabled or is there any other way to get this setup working w/o changing the config of the Border Controller?
Thanks in advance,
Florian.
------------------------------------------------------------------------------
Xperia(TM) PLAY
It's a major breakthrough. An authentic gaming
smartphone on the nation's most reliable network.
And it wants your games.
http://p.sf.net/sfu/verizon-sfdev
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
