Re: RES: RES: Registered endpoinds can call, unregistered cannot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Leandro,

in your packet trace, all packets are truncated. Please make sure you
capture the full packets ("-s 0" when using tcpdump for example).
And please also create a GnuGk level 5 trace from the same call you are
capturing the packets for.

Thanks,
Jan

leandro.alvares@xxxxxxxxxxxx wrote:
> Hello Jan,
> 
> 
> I got the wireshark trace as you asked. I'm sending it in annex ok?
> Can you help me? I'm getting at equipment "No route to destination" And so, the call is dropped
> 
> Thanks a lot.
> 
> Best regards,
> 
> Leandro Oliveira Alvares
> 
> 
> 
> -----Mensagem original-----
> De: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx] 
> Enviada em: terça-feira, 30 de março de 2010 12:03
> Para: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Assunto: Re:  RES: Registered endpoinds can call, unregistered cannot
> 
> Leandro,
> 
> even so your call also fails, I think the cause is quite different. In
> your trace we saw that GnuGk couldn't decode the incoming Setup message
> from the Aethra and thus ignored it. Thats a pretty good reason for a
> call to fail already.
> 
> Please post a capture from your Aethra so we can checkout what can be
> done.
> 
> Jan
> 
> leandro.alvares@xxxxxxxxxxxx wrote:
> > Siem,
> > 
> >  
> > 
> > Did you fix the problem?
> > 
> > I'm getting the same as you....
> > 
> > Jan, as I saw it is the same problem as I sent you last week. 
> > 
> > Using PVX I can connect to all endpoints, but when I do another call, I need to force registration with gnuGK, and when I'm using Aethra, It always receive "No route to destination". I'm preparing the trace to send...
> > 
> >  
> > 
> > Thanks,
> > 
> >  
> > 
> > Regards,
> > 
> >  
> > 
> > Leandro.
> > 
> >  
> > 
> >  
> > 
> >  
> > 
> > -----Mensagem original-----
> > De: Siem Smit [mailto:ssmit@xxxxxxxxxxxxxxxxx] 
> > Enviada em: segunda-feira, 29 de março de 2010 09:20
> > Para: GNU Gatekeeper Users
> > Assunto: Re:  Registered endpoinds can call,unregistered cannot
> > 
> >  
> > 
> > Jan,
> > 
> > Please find the output as requested.
> > 
> > Note using unregisterd endpoint from LAN worked as expected.
> > 
> >  
> > 
> >  
> > 
> > 2010/03/29 13:29:39.165 4         yasocket.cxx(905)   TCPSrv      Accept
> > 
> > request on 192.168.0.1:1720
> > 
> > 2010/03/29 13:29:39.186 3     ProxyChannel.cxx(1023)  Q931s
> > 
> > Received: Setup CRV=11422 from 80.101.141.10:3231
> > 
> > 2010/03/29 13:29:39.187 4     ProxyChannel.cxx(966)   Q931
> > 
> > Received: {
> > 
> >   q931pdu = {
> > 
> >     protocolDiscriminator = 8
> > 
> >     callReference = 11422
> > 
> >     from = originator
> > 
> >     messageType = Setup
> > 
> >     IE: Bearer-Capability = {
> > 
> >       88 18 88 a5                                        ....
> > 
> >     }
> > 
> >     IE: Display = {
> > 
> >       4d 69 73 68 61                                     Misha
> > 
> >     }
> > 
> >     IE: Called-Party-Number = {
> > 
> >       a1 30 31 34 35                                     .0145
> > 
> >     }
> > 
> >     IE: User-User = {
> > 
> >       60 a8 06 00 08 91 4a 00  04 02 40 04 00 4d 00 69
> > 
> > `.....J...@..M.i
> > 
> >       00 73 00 68 00 61 01 80  39 b5 22 c0 b5 00 23 31
> > 
> > .s.h.a..9."...#1
> > 
> >       0f 50 6f 6c 79 63 6f 6d  20 56 69 61 56 69 64 65   .Polycom
> > 
> > ViaVide
> > 
> >       6f 16 52 65 6c 65 61 73  65 20 38 2e 30 3a 20 38   o.Release 8.0:
> > 
> > 8
> > 
> >       2e 30 2e 32 2e 30 32 33  35 00 7b 7b 7b 04 06 b8
> > 
> > .0.2.0235..~....
> > 
> >       00 02 30 44 15 f5 0e 69  12 36 a8 7a 2b 88 21 46
> > 
> > ..0D...i.6.z+.!F
> > 
> >       07 00 cd 0d 98 00 07 00  50 65 8d 0a 0c 9f 11 00
> > 
> > ........Pe......
> > 
> >       02 30 44 15 f5 0e 69 12  36 a7 7a 2b 88 21 46 07
> > 
> > .0D...i.6.z+.!F.
> > 
> >       01 00 01 00 01 00 01 00  01 00 01 40 10 80 01 00
> > 
> > ...........@....
> > 
> >       00 05 0e 53 65 74 75 70  20 2d 20 6d 65 73 73 61   ...Setup -
> > 
> > messa
> > 
> >       67 65                                              ge
> > 
> >     }
> > 
> >   }
> > 
> >   h225pdu = {
> > 
> >     h323_uu_pdu = {
> > 
> >       h323_message_body = setup {
> > 
> >         protocolIdentifier = 0.0.8.2250.0.4
> > 
> >         sourceAddress = 2 entries {
> > 
> >           [0]=h323_ID  5 characters {
> > 
> >             004d 0069 0073 0068 0061                  Misha
> > 
> >           }
> > 
> >           [1]=dialedDigits "0682"
> > 
> >         }
> > 
> >         sourceInfo = {
> > 
> >           vendor = {
> > 
> >             vendor = {
> > 
> >               t35CountryCode = 181
> > 
> >               t35Extension = 0
> > 
> >               manufacturerCode = 9009
> > 
> >             }
> > 
> >             productId =  16 octets {
> > 
> >               50 6f 6c 79 63 6f 6d 20  56 69 61 56 69 64 65 6f   Polycom
> > 
> > ViaVideo
> > 
> >             }
> > 
> >             versionId =  23 octets {
> > 
> >               52 65 6c 65 61 73 65 20  38 2e 30 3a 20 38 2e 30   Release
> > 
> > 8.0: 8.0
> > 
> >               2e 32 2e 30 32 33 35                               .2.0235
> > 
> >             }
> > 
> >           }
> > 
> >           terminal = {
> > 
> >           }
> > 
> >           mc = false
> > 
> >           undefinedNode = false
> > 
> >         }
> > 
> >         destCallSignalAddress = ipAddress {
> > 
> >           ip =  4 octets {
> > 
> >             7b 7b 7b 04                                        .~..
> > 
> >           }
> > 
> >           port = 1720
> > 
> >         }
> > 
> >         activeMC = false
> > 
> >         conferenceID =  16 octets {
> > 
> >           02 30 44 15 f5 0e 69 12  36 a8 7a 2b 88 21 46 07
> > 
> > .0D...i.6.z+.!F.
> > 
> >         }
> > 
> >         conferenceGoal = create <<null>>
> > 
> >         callType = pointToPoint <<null>>
> > 
> >         sourceCallSignalAddress = ipAddress {
> > 
> >           ip =  4 octets {
> > 
> >             50 65 8d 0a                                        Pe..
> > 
> >           }
> > 
> >           port = 3231
> > 
> >         }
> > 
> >         callIdentifier = {
> > 
> >           guid =  16 octets {
> > 
> >             02 30 44 15 f5 0e 69 12  36 a7 7a 2b 88 21 46 07
> > 
> > .0D...i.6.z+.!F.
> > 
> >           }
> > 
> >         }
> > 
> >         mediaWaitForConnect = false
> > 
> >         canOverlapSend = false
> > 
> >         multipleCalls = false
> > 
> >         maintainConnection = false
> > 
> >         presentationIndicator = presentationAllowed <<null>>
> > 
> >         screeningIndicator = userProvidedVerifiedAndFailed
> > 
> >       }
> > 
> >       h245Tunneling = false
> > 
> >     }
> > 
> >     user_data = {
> > 
> >       protocol_discriminator = 5
> > 
> >       user_information =  15 octets {
> > 
> >         53 65 74 75 70 20 2d 20  6d 65 73 73 61 67 65      Setup -
> > 
> > message
> > 
> >       }
> > 
> >     }
> > 
> >   }
> > 
> > }
> > 
> > 2010/03/29 13:29:39.187 4     ProxyChannel.cxx(1918)  Q931s
> > 
> > GWRewrite source for 80.101.141.10:3231: setup H323 ID or E164
> > 
> > 2010/03/29 13:29:39.188 4     ProxyChannel.cxx(2308)  Q931s
> > 
> > Unregistered party is not NATed
> > 
> > 2010/03/29 13:29:39.188 2           RasTbl.cxx(3369)
> > 
> > CallTable::Insert(CALL) Call No. 11, total sessions : 1
> > 
> > 2010/03/29 13:29:39.188 2           gkacct.cxx(1088)  GKACCT
> > 
> > Successfully logged event 1 for call no. 11
> > 
> > 2010/03/29 13:29:39.188 4     ProxyChannel.cxx(4297)  Q931s Set
> > 
> > Called Numbering Plan 1 Type Of Number 2
> > 
> > 2010/03/29 13:29:39.188 3     ProxyChannel.cxx(2705)  Q931s Call 11
> > 
> > is NAT type 0
> > 
> > 2010/03/29 13:29:39.188 1     ProxyChannel.cxx(870)   Call 11:
> > 
> > h245Routed=1 proxy=1
> > 
> > 2010/03/29 13:29:39.188 3     ProxyChannel.cxx(887)   GK    Call 11
> > 
> > proxy enabled
> > 
> > 2010/03/29 13:29:39.188 4     ProxyChannel.cxx(966)   Q931  Send to
> > 
> > 123.123.123.4:1720 {
> > 
> >   q931pdu = {
> > 
> >     protocolDiscriminator = 8
> > 
> >     callReference = 11422
> > 
> >     from = originator
> > 
> >     messageType = Setup
> > 
> >     IE: Bearer-Capability = {
> > 
> >       88 18 88 a5                                        ....
> > 
> >     }
> > 
> >     IE: Display = {
> > 
> >       4d 69 73 68 61                                     Misha
> > 
> >     }
> > 
> >     IE: Called-Party-Number = {
> > 
> >       a1 30 31 34 35                                     .0145
> > 
> >     }
> > 
> >     IE: User-User = {
> > 
> >       60 b8 06 00 08 91 4a 00  04 02 40 04 00 4d 00 69
> > 
> > `.....J...@..M.i
> > 
> >       00 73 00 68 00 61 01 80  39 b5 22 c0 b5 00 23 31
> > 
> > .s.h.a..9."...#1
> > 
> >       0f 50 6f 6c 79 63 6f 6d  20 56 69 61 56 69 64 65   .Polycom
> > 
> > ViaVide
> > 
> >       6f 16 52 65 6c 65 61 73  65 20 38 2e 30 3a 20 38   o.Release 8.0:
> > 
> > 8
> > 
> >       2e 30 2e 32 2e 30 32 33  35 00 01 01 80 34 78 00
> > 
> > .0.2.0235....4x.
> > 
> >       7b 7b 7b 04 06 b8 00 02  30 44 15 f5 0e 69 12 36
> > 
> > .~......0D...i.6
> > 
> >       a8 7a 2b 88 21 46 07 00  7d 0d 98 07 00 d5 7e 8a
> > 
> > .z+.!F..}.....~.
> > 
> >       04 06 b8 11 00 02 30 44  15 f5 0e 69 12 36 a7 7a
> > 
> > ......0D...i.6.z
> > 
> >       2b 88 21 46 07 01 00 01  00 01 00 01 00 01 00 01
> > 
> > +.!F............
> > 
> >       40 02 80 01 00 00 05 0e  53 65 74 75 70 20 2d 20   @.......Setup -
> > 
> >  
> > 
> >       6d 65 73 73 61 67 65                               message
> > 
> >     }
> > 
> >   }
> > 
> >   h225pdu = {
> > 
> >     h323_uu_pdu = {
> > 
> >       h323_message_body = setup {
> > 
> >         protocolIdentifier = 0.0.8.2250.0.4
> > 
> >         sourceAddress = 2 entries {
> > 
> >           [0]=h323_ID  5 characters {
> > 
> >             004d 0069 0073 0068 0061                  Misha
> > 
> >           }
> > 
> >           [1]=dialedDigits "0682"
> > 
> >         }
> > 
> >         sourceInfo = {
> > 
> >           vendor = {
> > 
> >             vendor = {
> > 
> >               t35CountryCode = 181
> > 
> >               t35Extension = 0
> > 
> >               manufacturerCode = 9009
> > 
> >             }
> > 
> >             productId =  16 octets {
> > 
> >               50 6f 6c 79 63 6f 6d 20  56 69 61 56 69 64 65 6f   Polycom
> > 
> > ViaVideo
> > 
> >             }
> > 
> >             versionId =  23 octets {
> > 
> >               52 65 6c 65 61 73 65 20  38 2e 30 3a 20 38 2e 30   Release
> > 
> > 8.0: 8.0
> > 
> >               2e 32 2e 30 32 33 35                               .2.0235
> > 
> >             }
> > 
> >           }
> > 
> >           terminal = {
> > 
> >           }
> > 
> >           mc = false
> > 
> >           undefinedNode = false
> > 
> >         }
> > 
> >         destinationAddress = 1 entries {
> > 
> >           [0]=dialedDigits "0145"
> > 
> >         }
> > 
> >         destCallSignalAddress = ipAddress {
> > 
> >           ip =  4 octets {
> > 
> >             7b 7b 7b 04                                        .~..
> > 
> >           }
> > 
> >           port = 1720
> > 
> >         }
> > 
> >         activeMC = false
> > 
> >         conferenceID =  16 octets {
> > 
> >           02 30 44 15 f5 0e 69 12  36 a8 7a 2b 88 21 46 07
> > 
> > .0D...i.6.z+.!F.
> > 
> >         }
> > 
> >         conferenceGoal = create <<null>>
> > 
> >         callType = pointToPoint <<null>>
> > 
> >         sourceCallSignalAddress = ipAddress {
> > 
> >           ip =  4 octets {
> > 
> >             7b 7b 7b 04                                        .~..
> > 
> >           }
> > 
> >           port = 1720
> > 
> >         }
> > 
> >         callIdentifier = {
> > 
> >           guid =  16 octets {
> > 
> >             02 30 44 15 f5 0e 69 12  36 a7 7a 2b 88 21 46 07
> > 
> > .0D...i.6.z+.!F.
> > 
> >           }
> > 
> >         }
> > 
> >         mediaWaitForConnect = false
> > 
> >         canOverlapSend = false
> > 
> >         multipleCalls = false
> > 
> >         maintainConnection = false
> > 
> >         presentationIndicator = presentationAllowed <<null>>
> > 
> >         screeningIndicator = userProvidedVerifiedAndFailed
> > 
> >       }
> > 
> >       h245Tunneling = false
> > 
> >     }
> > 
> >     user_data = {
> > 
> >       protocol_discriminator = 5
> > 
> >       user_information =  15 octets {
> > 
> >         53 65 74 75 70 20 2d 20  6d 65 73 73 61 67 65      Setup -
> > 
> > message
> > 
> >       }
> > 
> >     }
> > 
> >   }
> > 
> > }
> > 
> > 2010/03/29 13:29:39.189 4           osutil.cxx(195)   PWLib File
> > 
> > handle low water mark set: 37 CallSignalSocket
> > 
> > 2010/03/29 13:29:45.195 1     ProxyChannel.cxx(4191)  Q931d Could
> > 
> > not open/connect Q.931 socket at 192.168.0.1:30010 - error 9/110:
> > 
> > Connection timed out
> > 
> > 2010/03/29 13:29:45.195 3     ProxyChannel.cxx(3882)  Q931
> > 
> > 123.123.123.4:1720 DIDN'T ACCEPT THE CALL
> > 
> > 2010/03/29 13:29:45.195 4     ProxyChannel.cxx(966)   Q931  Send to
> > 
> > 80.101.141.10:3231 {
> > 
> >  
> > 
> > SNIP
> > 
> >  
> > 
> > With kind regards,
> > 
> > Siem
> > 
> >  
> > 
> > -----Original Message-----
> > 
> > From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx] 
> > 
> > Sent: maandag 29 maart 2010 11:25
> > 
> > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> > 
> > Subject: Re:  Registered endpoinds can call,
> > 
> > unregistered cannot
> > 
> >  
> > 
> > Siem,
> > 
> >  
> > 
> > please post a similar trace snippet for the call to 123.123.123.4##0183.
> > 
> > In the trace you posted 0183 isn't sent to the gatekeeper, so its
> > 
> > obvious why the call fails. The call to 123.123.123.4##0183 probably
> > 
> > fails for a different reason.
> > 
> >  
> > 
> > Regards,
> > 
> > Jan
> > 
> >  
> > 
> > Siem Smit wrote:
> > 
> > > Hello Jan,
> > 
> > > 
> > 
> > > Thanks for a very quick reply!
> > 
> > > Yes i did try also 123.123.123.4##0183 with same result.
> > 
> > > I really suspect it hasd to do with the address 123.123.123.4 wich is 
> > 
> > > not present on gnugk but only a forwarder (NAT) on the firewall
> > 
> > > 
> > 
> > > Ps i forgot to mention  i also use
> > 
> > > Home=192.168.0.1
> > 
> > > And
> > 
> > > ProxyForNAT=1
> > 
> > >  
> > 
> > > With kind regards,
> > 
> > > 
> > 
> > > Siem
> > 
> > > 
> > 
> > > 
> > 
> > > -----Original Message-----
> > 
> > > From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx]
> > 
> > > Sent: maandag 29 maart 2010 11:04
> > 
> > > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> > 
> > > Subject: Re:  Registered endpoinds can call, 
> > 
> > > unregistered cannot
> > 
> > > 
> > 
> > > Hi Siem,
> > 
> > > 
> > 
> > > I don't think Polycom properly understands the standard dialing syntax
> > 
> >  
> > 
> > > 0183@xxxxxxxxxxxxxx They usually use 123.123.123.4##0183. Did you try 
> > 
> > > that, too ?
> > 
> > > 
> > 
> > > Regards,
> > 
> > > Jan
> > 
> > > 
> > 
> > > 
> > 
> > > Siem Smit wrote:
> > 
> > > > Hello All,
> > 
> > > >  
> > 
> > > > I have a weird problem.
> > 
> > > > I have a tandberg MXP 990 and Polycom QDX 6000 system, registered at
> > 
> >  
> > 
> > > > our gnugk (192.168.0.1) connected to a Palo Alto firewall that is 
> > 
> > > > configured to do a 1 on 1 portforward (NAT) from 123.123.123.4 to
> > 
> > > 192.168.0.1.
> > 
> > > > If i connect from Home with Polycom PVX 8.02 to the external IP
> > 
> > > > 123.123.123.4 it succesfully register and i can make calls to all 
> > 
> > > > endpoints.
> > 
> > > > I can also call out to endpoints not registered to the gatekeeper 
> > 
> > > > (IP
> > 
> > > > Call)  from all endpoints.
> > 
> > > >  
> > 
> > > > However if i unregister from gnugk and try to make a call
> > 
> > > > 0183@xxxxxxxxxxxxx i get a no route to destination.
> > 
> > > >  
> > 
> > > > Below is the output of a level 4 trace:
> > 
> > > > 2010/03/27 20:22:50.160 4     yasocket.cxx(905) TCPSrv Accept
> > 
> > request
> > 
> > > on
> > 
> > > > 192.168.0.1:1720
> > 
> > > > 2010/03/27 20:22:50.176 3 ProxyChannel.cxx(1023) Q931s Received: 
> > 
> > > > Setup
> > 
> > > > CRV=31349 from 85.100.140.1:3230
> > 
> > > > 2010/03/27 20:22:50.177 4 ProxyChannel.cxx(966) Q931 Received: {
> > 
> > > >   q931pdu = {
> > 
> > > >     protocolDiscriminator = 8
> > 
> > > >     callReference = 31349
> > 
> > > >     from = originator
> > 
> > > >     messageType = Setup
> > 
> > > >     IE: Bearer-Capability = {
> > 
> > > >       88 18 88 a5                                        ....
> > 
> > > >     }
> > 
> > > >     IE: Display = {
> > 
> > > >       4d 69 73 68 61                                     Home
> > 
> > > >     }
> > 
> > > >     IE: User-User = {
> > 
> > > >       60 a8 06 00 08 91 4a 00  04 02 40 04 00 4d 00 69 
> > 
> > > > `.....J...@..M.i
> > 
> > > >       00 73 00 68 00 61 01 80  39 b5 22 c0 b5 00 23 31
> > 
> > > > .s.h.a..9."...#1
> > 
> > > >       0f 50 6f 6c 79 63 6f 6d  20 56 69 61 56 69 64 65   .Polycom
> > 
> > > > ViaVide
> > 
> > > >       6f 16 52 65 6c 65 61 73  65 20 38 2e 30 3a 20 38   o.Release
> > 
> > > 8.0:
> > 
> > > > 8
> > 
> > > >       2e 30 2e 32 2e 30 32 33  35 00 d5 7e 8a 04 06 b8 
> > 
> > > > .0.2.0235..~....
> > 
> > > >       00 02 30 40 69 cb 00 00  10 2b 9f 12 e3 e0 99 5e 
> > 
> > > > ..0@xxxxx+.....^
> > 
> > > >       3f 00 cd 0d 98 00 07 00  50 65 8d 0a 0c 9e 11 00 
> > 
> > > > ?.......Pe......
> > 
> > > >       02 30 40 69 cb 00 00 10  2b 9e 12 e3 e0 99 5e 3f 
> > 
> > > > .0@xxxxx+.....^?
> > 
> > > >       01 00 01 00 01 00 01 00  01 00 01 40 10 80 01 00 
> > 
> > > > ...........@....
> > 
> > > >       00 05 0e 53 65 74 75 70  20 2d 20 6d 65 73 73 61   ...Setup -
> > 
> > > > messa
> > 
> > > >       67 65                                              ge
> > 
> > > >     }
> > 
> > > >   }
> > 
> > > >   h225pdu = {
> > 
> > > >     h323_uu_pdu = {
> > 
> > > >       h323_message_body = setup {
> > 
> > > >         protocolIdentifier = 0.0.8.2250.0.4
> > 
> > > >         sourceAddress = 2 entries {
> > 
> > > >           [0]=h323_ID  5 characters {
> > 
> > > >             004d 0069 0073 0068 0061                  Home
> > 
> > > >           }
> > 
> > > >           [1]=dialedDigits "0682"
> > 
> > > >         }
> > 
> > > >         sourceInfo = {
> > 
> > > >           vendor = {
> > 
> > > >             vendor = {
> > 
> > > >               t35CountryCode = 181
> > 
> > > >               t35Extension = 0
> > 
> > > >               manufacturerCode = 9009
> > 
> > > >             }
> > 
> > > >             productId =  16 octets {
> > 
> > > >               50 6f 6c 79 63 6f 6d 20  56 69 61 56 69 64 65 6f
> > 
> > > Polycom
> > 
> > > > ViaVideo
> > 
> > > >             }
> > 
> > > >             versionId =  23 octets {
> > 
> > > >               52 65 6c 65 61 73 65 20  38 2e 30 3a 20 38 2e 30
> > 
> > > Release
> > 
> > > > 8.0: 8.0
> > 
> > > >               2e 32 2e 30 32 33 35
> > 
> > > .2.0235
> > 
> > > >             }
> > 
> > > >           }
> > 
> > > >           terminal = {
> > 
> > > >           }
> > 
> > > >           mc = false
> > 
> > > >           undefinedNode = false
> > 
> > > >         }
> > 
> > > >         destCallSignalAddress = ipAddress {
> > 
> > > >           ip =  4 octets {
> > 
> > > >             7b 7b 7b 04                                        .~..
> > 
> > > >           }
> > 
> > > >           port = 1720
> > 
> > > >         }
> > 
> > > >         activeMC = false
> > 
> > > >         conferenceID =  16 octets {
> > 
> > > >           02 30 40 69 cb 00 00 10  2b 9f 12 e3 e0 99 5e 3f 
> > 
> > > > .0@xxxxx+.....^?
> > 
> > > >         }
> > 
> > > >         conferenceGoal = create <<null>>
> > 
> > > >         callType = pointToPoint <<null>>
> > 
> > > >         sourceCallSignalAddress = ipAddress {
> > 
> > > >           ip =  4 octets {
> > 
> > > >             55 64 8c 01                                        Pe..
> > 
> > > >           }
> > 
> > > >           port = 3230
> > 
> > > >         }
> > 
> > > >         callIdentifier = {
> > 
> > > >           guid =  16 octets {
> > 
> > > >             02 30 40 69 cb 00 00 10  2b 9e 12 e3 e0 99 5e 3f 
> > 
> > > > .0@xxxxx+.....^?
> > 
> > > >           }
> > 
> > > >         }
> > 
> > > >         mediaWaitForConnect = false
> > 
> > > >         canOverlapSend = false
> > 
> > > >         multipleCalls = false
> > 
> > > >         maintainConnection = false
> > 
> > > >         presentationIndicator = presentationAllowed <<null>>
> > 
> > > >         screeningIndicator = userProvidedVerifiedAndFailed
> > 
> > > >       }
> > 
> > > >       h245Tunneling = false
> > 
> > > >     }
> > 
> > > >     user_data = {
> > 
> > > >       protocol_discriminator = 5
> > 
> > > >       user_information =  15 octets {
> > 
> > > >         53 65 74 75 70 20 2d 20  6d 65 73 73 61 67 65      Setup -
> > 
> > > > message
> > 
> > > >       }
> > 
> > > >     }
> > 
> > > >   }
> > 
> > > > }
> > 
> > > > 2010/03/27 20:22:50.178 2    singleton.cxx(25) Create instance:
> > 
> > > > PreliminaryCallTable(9)
> > 
> > > > 2010/03/27 20:22:50.178 4 ProxyChannel.cxx(2308) Q931s Unregistered 
> > 
> > > > party is not NATed
> > 
> > > > 2010/03/27 20:22:50.178 2       RasTbl.cxx(3369)
> > 
> > > CallTable::Insert(CALL)
> > 
> > > > Call No. 1, total sessions : 1
> > 
> > > > 2010/03/27 20:22:50.178 2       gkacct.cxx(1088) GKACCT Successfully
> > 
> > > > logged event 1 for call no. 1
> > 
> > > > 2010/03/27 20:22:50.178 3 ProxyChannel.cxx(2705) Q931s Call 1 is NAT
> > 
> >  
> > 
> > > > type 0
> > 
> > > > 2010/03/27 20:22:50.178 1 ProxyChannel.cxx(870) Call 1: h245Routed=1
> > 
> > > > proxy=1
> > 
> > > > 2010/03/27 20:22:50.178 3 ProxyChannel.cxx(887) GK Call 1 proxy 
> > 
> > > > enabled
> > 
> > > > 2010/03/27 20:22:50.189 4 ProxyChannel.cxx(966) Q931 Send to 
> > 
> > > > 123.123.123.4:1720 {
> > 
> > > >   q931pdu = {
> > 
> > > >     protocolDiscriminator = 8
> > 
> > > >     callReference = 31349
> > 
> > > >     from = originator
> > 
> > > >     messageType = Setup
> > 
> > > >     IE: Bearer-Capability = {
> > 
> > > >       88 18 88 a5                                        ....
> > 
> > > >     }
> > 
> > > >     IE: Display = {
> > 
> > > >       4d 69 73 68 61                                     Home
> > 
> > > >     }
> > 
> > > >     IE: User-User = {
> > 
> > > >       60 a8 06 00 08 91 4a 00  04 02 40 04 00 4d 00 69 
> > 
> > > > `.....J...@..M.i
> > 
> > > >       00 73 00 68 00 61 01 80  39 b5 22 c0 b5 00 23 31
> > 
> > > > .s.h.a..9."...#1
> > 
> > > >       0f 50 6f 6c 79 63 6f 6d  20 56 69 61 56 69 64 65   .Polycom
> > 
> > > > ViaVide
> > 
> > > >       6f 16 52 65 6c 65 61 73  65 20 38 2e 30 3a 20 38   o.Release
> > 
> > > 8.0:
> > 
> > > > 8
> > 
> > > >       2e 30 2e 32 2e 30 32 33  35 00 d5 7e 8a 04 06 b8 
> > 
> > > > .0.2.0235..~....
> > 
> > > >       00 02 30 40 69 cb 00 00  10 2b 9f 12 e3 e0 99 5e 
> > 
> > > > ..0@xxxxx+.....^
> > 
> > > >       3f 00 7d 0d 98 07 00 d5  7e 8a 04 06 b8 11 00 02 
> > 
> > > > ?.}.....~.......
> > 
> > > >       30 40 69 cb 00 00 10 2b  9e 12 e3 e0 99 5e 3f 01 
> > 
> > > > 0@xxxxx+.....^?.
> > 
> > > >       00 01 00 01 00 01 00 01  00 01 40 02 80 01 00 00 
> > 
> > > > ..........@.....
> > 
> > > >       05 0e 53 65 74 75 70 20  2d 20 6d 65 73 73 61 67   ..Setup -
> > 
> > > > messag
> > 
> > > >       65                                                 e
> > 
> > > >     }
> > 
> > > >   }
> > 
> > > >   h225pdu = {
> > 
> > > >     h323_uu_pdu = {
> > 
> > > >       h323_message_body = setup {
> > 
> > > >         protocolIdentifier = 0.0.8.2250.0.4
> > 
> > > >         sourceAddress = 2 entries {
> > 
> > > >           [0]=h323_ID  5 characters {
> > 
> > > >             004d 0069 0073 0068 0061                  Home
> > 
> > > >           }
> > 
> > > >           [1]=dialedDigits "0682"
> > 
> > > >         }
> > 
> > > >         sourceInfo = {
> > 
> > > >           vendor = {
> > 
> > > >             vendor = {
> > 
> > > >               t35CountryCode = 181
> > 
> > > >               t35Extension = 0
> > 
> > > >               manufacturerCode = 9009
> > 
> > > >             }
> > 
> > > >             productId =  16 octets {
> > 
> > > >               50 6f 6c 79 63 6f 6d 20  56 69 61 56 69 64 65 6f
> > 
> > > Polycom
> > 
> > > > ViaVideo
> > 
> > > >             }
> > 
> > > >             versionId =  23 octets {
> > 
> > > >               52 65 6c 65 61 73 65 20  38 2e 30 3a 20 38 2e 30
> > 
> > > Release
> > 
> > > > 8.0: 8.0
> > 
> > > >               2e 32 2e 30 32 33 35
> > 
> > > .2.0235
> > 
> > > >             }
> > 
> > > >           }
> > 
> > > >           terminal = {
> > 
> > > >           }
> > 
> > > >           mc = false
> > 
> > > >           undefinedNode = false
> > 
> > > >         }
> > 
> > > >         destCallSignalAddress = ipAddress {
> > 
> > > >           ip =  4 octets {
> > 
> > > >             7b 7b 7b 04                                        .~..
> > 
> > > >           }
> > 
> > > >           port = 1720
> > 
> > > >         }
> > 
> > > >         activeMC = false
> > 
> > > >         conferenceID =  16 octets {
> > 
> > > >           02 30 40 69 cb 00 00 10  2b 9f 12 e3 e0 99 5e 3f 
> > 
> > > > .0@xxxxx+.....^?
> > 
> > > >         }
> > 
> > > >         conferenceGoal = create <<null>>
> > 
> > > >         callType = pointToPoint <<null>>
> > 
> > > >         sourceCallSignalAddress = ipAddress {
> > 
> > > >           ip =  4 octets {
> > 
> > > >             7b 7b 7b 04                                        .~..
> > 
> > > >           }
> > 
> > > >           port = 1720
> > 
> > > >         }
> > 
> > > >         callIdentifier = {
> > 
> > > >           guid =  16 octets {
> > 
> > > >             02 30 40 69 cb 00 00 10  2b 9e 12 e3 e0 99 5e 3f 
> > 
> > > > .0@xxxxx+.....^?
> > 
> > > >           }
> > 
> > > >         }
> > 
> > > >         mediaWaitForConnect = false
> > 
> > > >         canOverlapSend = false
> > 
> > > >         multipleCalls = false
> > 
> > > >         maintainConnection = false
> > 
> > > >         presentationIndicator = presentationAllowed <<null>>
> > 
> > > >         screeningIndicator = userProvidedVerifiedAndFailed
> > 
> > > >       }
> > 
> > > >       h245Tunneling = false
> > 
> > > >     }
> > 
> > > >     user_data = {
> > 
> > > >       protocol_discriminator = 5
> > 
> > > >       user_information =  15 octets {
> > 
> > > >         53 65 74 75 70 20 2d 20  6d 65 73 73 61 67 65      Setup -
> > 
> > > > message
> > 
> > > >       }
> > 
> > > >     }
> > 
> > > >   }
> > 
> > > > }
> > 
> > > > 2010/03/27 20:22:50.189 4       osutil.cxx(188) PWLib File handle
> > 
> > high
> > 
> > > > water mark set: 37 CallSignalSocket
> > 
> > > > 2010/03/27 20:22:56.196 1 ProxyChannel.cxx(4191) Q931d Could not 
> > 
> > > > open/connect Q.931 socket at 192.168.0.1:30000 - error 9/110:
> > 
> > > > Connection timed out
> > 
> > > > 2010/03/27 20:22:56.196 3 ProxyChannel.cxx(3882) Q931 
> > 
> > > > 123.123.123.4:1720 DIDN'T ACCEPT THE CALL
> > 
> > > > 2010/03/27 20:22:56.197 4 ProxyChannel.cxx(966) Q931 Send to 
> > 
> > > > 85.100.140.1:3230 {
> > 
> > > > 
> > 
> > > > ********************************************************************
> > 
> > > > **
> > 
> > > > **
> > 
> > > > ********************************************************************
> > 
> > > > **
> > 
> > > > **
> > 
> > > > ****************************************
> > 
> > > >  
> > 
> > > > The lines
> > 
> > > > 2010/03/27 20:22:56.196 1 ProxyChannel.cxx(4191) Q931d Could not 
> > 
> > > > open/connect Q.931 socket at 192.168.0.1:30000 - error 9/110:
> > 
> > > > Connection timed out
> > 
> > > > 2010/03/27 20:22:56.196 3 ProxyChannel.cxx(3882) Q931 
> > 
> > > > 123.123.123.4:1720 DIDN'T ACCEPT THE CALL are giving me a clue that 
> > 
> > > > somewhere in the setup message the internal IP address of gnugk gets
> > 
> >  
> > 
> > > > switched with external IP.
> > 
> > > >  
> > 
> > > > ********************************************************************
> > 
> > > > **
> > 
> > > > **
> > 
> > > > ********************************************************************
> > 
> > > > **
> > 
> > > > **
> > 
> > > > ****************************************
> > 
> > > >  
> > 
> > > > This is my gatekeeper.ini
> > 
> > > > [Gatekeeper::Main]
> > 
> > > > FortyTwo=42
> > 
> > > > TimeToLive=300
> > 
> > > > UnicastRasPort=1719
> > 
> > > > ExternalIP=123.123.123.4
> > 
> > > > Name=KWA-GK1
> > 
> > > >  
> > 
> > > > [LogFile]
> > 
> > > > Rotate=Daily
> > 
> > > > RotateTime=23:00
> > 
> > > >  
> > 
> > > > [RoutedMode]
> > 
> > > > GKRouted=1
> > 
> > > > H245Routed=1
> > 
> > > > CallSignalPort=1720
> > 
> > > > AcceptNeighborCalls=1
> > 
> > > > AcceptUnregisteredCalls=1
> > 
> > > > TreatUnregisteredNAT=1
> > 
> > > > SupportNATedEndpoints=1
> > 
> > > > SupportCallingNATedEndpoints=1
> > 
> > > > EnableH46018=0
> > 
> > > > EnableH46023=0
> > 
> > > > Q931PortRange=30000-30999
> > 
> > > > H245PortRange=40000-40999
> > 
> > > >  
> > 
> > > > [Proxy]
> > 
> > > > Enable=1
> > 
> > > > InternalNetwork=192.168.0.0/24
> > 
> > > > T120PortRange=50000-50999
> > 
> > > > RTPPortRange=50000-50999
> > 
> > > >  
> > 
> > > > [GkStatus::Auth]
> > 
> > > > rule=explicit
> > 
> > > > 127.0.0.1=1
> > 
> > > >  
> > 
> > > > [Gatekeeper::Acct]
> > 
> > > > FileAcct=required
> > 
> > > >  
> > 
> > > > [FileAcct]
> > 
> > > > DetailFile=/var/log/gnugk/cdr.log
> > 
> > > > Rotate=weekly
> > 
> > > > RotateDay=Sun
> > 
> > > > RotateTime=00:59
> > 
> > > >  
> > 
> > > > [RoutingPolicy]
> > 
> > > > default=explicit,internal,catchall
> > 
> > > >  
> > 
> > > > [Routing::Catchall]
> > 
> > > > CatchAllIP=192.168.0.218
> > 
> > > >  
> > 
> > > > [RasSrv::LRQFeatures]
> > 
> > > > AcceptNonNeighborLRQ=1
> > 
> > > >  
> > 
> > > > [RasSrv::ARQFeatures]
> > 
> > > > CallUnregisteredEndpoints=1
> > 
> > > >  
> > 
> > > > I am using Gatekeeper(GNU) Version(2.3.2) 
> > 
> > > > Ext(pthreads=1,radius=1,mysql=0,pgsql=0,firebird=0,odbc=0,sqlite=0,l
> > 
> > > > ar
> > 
> > > > ge
> > 
> > > > _fdset=0,crypto/ssl=0,h46018=1,h46023=1) Build(Feb 23 2010, 
> > 
> > > > 10:49:36) Sys(Linux i686 2.6.31-19-generic-pae) build from CVS
> > 
> > > >  
> > 
> > > > Any help is appreciated.
> > 
> > > >  
> > 
> > > > Siem

-- 
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/

------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/


[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux