Hi Ian, there is definitely no limit on the number of registrations in GnuGk. I would suggest you make a level 3 trace with GnuGk (add "-ttt -o trace.log") and see why the registrations fail. You should see the error code and probably some other warning message. If you don't find anything, post the 10 lines before and after the "registrationReject" to this list. Also, you probably want to set GKRouted=1. Regards, Jan Ian wrote: > Hi, > > I am using GnuGk (v 2.3.1) to replace a Quintum Gatekeeper. > > When I reach around 50 endpoints, no more will register with the GnuGk. > > The suspicious thing is that the Quintum gatekeeper does the same > thing, but Quintum told me that it was a limitation of their > gatekeeper, you want to register more than 50, buy another of their > gatekeepers. > > All of the gateways are Quintum, various models of their version 2 series. > > The GnuGk config: > > [Gatekeeper::Main] > FortyTwo=42 > Name=GnuGk > Home=127.0.0.1,xxx.xxx.34.96 > EndpointIDSuffix=_gnugk > TimeToLive=300 > StatusTraceLevel=0 > UseBroadcastListener=0 > UseMulticastListener=0 > > [GkStatus::Auth] > ; restrict access to the status port by an IP address > rule=explicit > 127.0.0.1=allow > xxx.xxx.197.140=allow > xxx.xxx.34.96=allow > default=forbid > Shutdown=allow > > [LogFile] > Rotate=Daily > RotateTime=00:00 > > [RoutedMode] > GKRouted=0 > H245Routed=1 > AcceptNeighborCalls=1 > AcceptUnregisteredCalls=1 > RemoveH245AddressOnTunneling=1 > RemoveCallOnDRQ=0 > DropCallsByReleaseComplete=1 > SendReleaseCompleteOnDRQ=0 > SupportNATedEndpoints=1 > TcpKeepAlive=1 > TranslateFacility=1 > > [Proxy] > Enable=0 > > [RasSrv::PermanentEndpoints] > xxx.xxx.58.82=GS_DX2060;* > xxx.xxx.59.154=EQ_DX2030;* > > [RasSrv::RRQFeatures] > AcceptEndpointIdentifier=1 > AcceptGatewayPrefixes=1 > > [RasSrv::Neighbors] > GK1=GnuGk > > [RasSrv::LRQFeatures] > NeighborTimeout=1 > > [Neighbor::GK1] > Host=xxx.xxx.34.89 > Dynamic=0 > SendPrefixes=* > AcceptPrefixes=* > > [EP::GS_DX2060] > Capacity=50 > GatewayPriority=2 > > [EP::EQ_DX2030] > Capacity=5 > GatewayPriority=1 > > [CallTable] > DefaultCallDurationLimit=3600 > > > Not sure of what you might want of the Quintum config, but here is the > h323 part from an ASM200: > > > H323SignalingGroup-1 : > PrimaryGateKeeperIPAddr : xxx.xxx.34.96 > SecondaryGateKeeperIPAddr : xxx.xxx.34.89 > GRQPrimaryGK : 0 No, do not allow > GRQSecondaryGK : 0 No, do not allow > RegisterDN : 1 GW Prefixes > RelayProgress : 1 Yes,default > IgnoreGrantedBandwidth : 0 No, not ignore > DefaultH245Tunneling : 1 enabled > H323ID : Test Alphnum string,1-31 > TimeOutRIP : 5 seconds > LightWeightRRQ : 1 Enable LwRRQ > GateWayType : 0 H323 GW; default > UsePartyNumber : 0 Off > EarlyH245 : 1 sent after alert > StartH245Collision : 1 H245 by spec > IgnoreFSifH245Addr : 0 default;does Faststa > MediaAfterConnect : 0 default; opens H245 > CRDoInboundARQ : 1 enables inbound ARQ > AutoExtIP : 1 enable > DirectGWRouting : 2 GK,then local > REServed : 0 user specific > AllowURQ : 1 enabled > RTPVerify : 0 disabled > RRQInterval : 0 0-65535,0 default > H245TimerVal : 4 Seconds > RRQV3Plus : 0 Don't use V3 plus > MuxCAPability : 0 Disabled > > Thanks. > > Ian. -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------------ SOLARIS 10 is the OS for Data Centers - provides features such as DTrace, Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW http://p.sf.net/sfu/solaris-dev2dev _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
