I try to use Ptlib 2.0.1 and after compile that, i change that folder to Pwlib and compile h323 Plus version 1.20.2 should work.
I will try Ptlib V2.4.5.
Thanks for your time.
Thanks,
-LN
On Thu, May 7, 2009 at 12:18 AM, Jan Willamowius <jan@xxxxxxxxxxxxxx> wrote:
Hi,
the names are a bit confusing: In the old OpenH323 days, there used to
be a library called PWLib. Some parts of that library were called ptlib.
When OpenH323 was forked to OPAL and H323Plus, the name of PWLib was
changed to PTLib.
PTLib 2.0.1 from h323plus.org is an in-between version that has most,
but not all references to PWLib renamed to PTLib. Thus you should set
both environment variables PWLIBDIR and PTLIBDIR to compile it.
If you use the the H323Plus CVS, you can use a current PTLib (eg.
2.4.5) form the OPAL project and only have to set PTLIBDIR.
Regards,
Jan
oso che bol wrote:
> HI Jan,
>
> Could you please confirm if we should compile both pwlib and ptlib?
>
> Thanks,
> -LN
>
> On Wed, May 6, 2009 at 11:38 PM, Jan Willamowius <jan@xxxxxxxxxxxxxx> wrote:
>
> > Thats already fixed on the CVS:
> >
> > Try setting PWLIBDIR=$PTLIBDIR in addition.
> >
> > Jan
> >
> > oso che bol wrote:
> > > Hi,
> > >
> > > I have a little bit confused about PTLIB.
> > >
> > > When compile pwlib, it also compiled ptlib.
> > >
> > > But i also compile Ptlib_v2_0_1 and set PTLIBDIR:
> > >
> > > export PTLIBDIR="/home/htklabs/pwlib/include/ptlib"
> > > But in ~/h323plus, ./configure told that:
> > > "Cannot find ptlib - please install or set PTLIBDIR and try again"
> > >
> > > Please give your advice.
> > >
> > > Thanks,
> > > -LN
> > >
> > > On Wed, May 6, 2009 at 7:59 PM, Jan Willamowius <jan@xxxxxxxxxxxxxx>
> > wrote:
> > >
> > > > Hi,
> > > >
> > > > compiling Pwlib 1.10.3 works on 64 bit if you disable a few modules
> > > > that GnuGk doesn't use anyway. I use this:
> > > >
> > > > ./configure --disable-video --disable-alsa --disable-openldap
> > > > --disable-expat --disable-sasl --disable-sdl --disable-ipv6
> > > >
> > > > But since you want to compile 2.3.0 with H.460.18 support, you should
> > > > use H323Plus (from htp://www.h323plus.org) and use this patch for
> > > > src/Makefile
> > > > http://www.gnugk.org/download/src-Makefile-h46018.patch
> > > > or use the CVS version.
> > > >
> > > > Regards,
> > > > Jan
> > > >
> > > >
> > > > oso che bol wrote:
> > > > > Hi,
> > > > >
> > > > > I met this issues when compile pwlib 1.10.3
> > > > >
> > > > > Ubuntu 8.10
> > > > > Gcc V4.3.2
> > > > > =====
> > > > > htklabs@vm01:~/pwlib$ sudo make
> > > > > bothnoshared
> > > > >
> > > > > make optnoshared debugnoshared
> > > > > make[1]: Entering directory `/home/htklabs/pwlib'
> > > > > make P_SHAREDLIB=0 opt
> > > > > make[2]: Entering directory `/home/htklabs/pwlib'
> > > > > set -e; make -C src/ptlib/unix opt; make -C plugins opt;
> > > > > make[3]: Entering directory `/home/htklabs/pwlib/src/ptlib/unix'
> > > > > make[3]: Nothing to be done for `opt'.
> > > > > make[3]: Leaving directory `/home/htklabs/pwlib/src/ptlib/unix'
> > > > > make[3]: Entering directory `/home/htklabs/pwlib/plugins'
> > > > > set -e; make -C sound_alsa opt; make -C sound_oss opt; make -C
> > > > > vidinput_v4l opt;
> > > > > make[4]: Entering directory `/home/htklabs/pwlib/plugins/sound_alsa'
> > > > > mkdir -p ../pwlib/device/sound
> > > > > g++ -D_REENTRANT -Wall -DP_64BIT -I/home/htklabs/pwlib/include \
> > > > > -lasound \
> > > > > -I. -shared sound_alsa.cxx -o
> > > > ../pwlib/device/sound/alsa_pwplugin.a
> > > > > In file included from /home/htklabs/pwlib/include/ptlib/timer.h:133,
> > > > > from /home/htklabs/pwlib/include/ptlib.h:175,
> > > > > from sound_alsa.h:1,
> > > > > from sound_alsa.cxx:139:
> > > > > /home/htklabs/pwlib/include/ptlib/notifier.h: In constructor
> > > > > ‘PNotifierFunction::PNotifierFunction(void*)’:
> > > > > /home/htklabs/pwlib/include/ptlib/notifier.h:42: warning: the address
> > of
> > > > > ‘obj’ will always evaluate as ‘true’
> > > > > sound_alsa.cxx: In member function ‘virtual BOOL
> > > > > PSoundChannelALSA::Write(const void*, PINDEX)’:
> > > > > sound_alsa.cxx:506: warning: suggest parentheses around && within ||
> > > > > sound_alsa.cxx: In member function ‘virtual BOOL
> > > > > PSoundChannelALSA::Read(void*, PINDEX)’:
> > > > > sound_alsa.cxx:554: warning: suggest parentheses around && within ||
> > > > > /usr/bin/ld: /tmp/cclZBxnC.o: relocation R_X86_64_32 against `a local
> > > > > symbol' can not be used when making a shared object; recompile with
> > -fPIC
> > > > > /tmp/cclZBxnC.o: could not read symbols: Bad value
> > > > > collect2: ld returned 1 exit status
> > > > > make[4]: *** [../pwlib/device/sound/alsa_pwplugin.a] Error 1
> > > > > make[4]: Leaving directory `/home/htklabs/pwlib/plugins/sound_alsa'
> > > > > make[3]: *** [opt] Error 2
> > > > > make[3]: Leaving directory `/home/htklabs/pwlib/plugins'
> > > > > make[2]: *** [opt] Error 2
> > > > > make[2]: Leaving directory `/home/htklabs/pwlib'
> > > > > make[1]: *** [optnoshared] Error 2
> > > > > make[1]: Leaving directory `/home/htklabs/pwlib'
> > > > > make: *** [bothnoshared] Error 2
> > > > > htklabs@vm01:~/pwlib$
> > > > >
> > > > > ===
> > > > > Thanks,
> > > > > -LN
> > > > >
> > > > > On Wed, May 6, 2009 at 3:25 PM, Jan Willamowius <jan@xxxxxxxxxxxxxx>
> > > > wrote:
> > > > >
> > > > > > Hi,
> > > > > >
> > > > > > 2.3.0 is not released, yet. You can download the current
> > development
> > > > > > version and compile it yourself. Please see
> > > > > > http://www.gnugk.org/h323develop.html
> > > > > >
> > > > > > Regards,
> > > > > > Jan
> > > > > >
> > > > > > oso che bol wrote:
> > > > > > > HI Jan,
> > > > > > >
> > > > > > > Could you please help to point me out how to download GnuGk
> > 2.3.0?
> > > > > > >
> > > > > > > I only see on download part version 2.2.8 ...
> > > > > > >
> > > > > > > Thanks,
> > > > > > > -LN
> > > > > > >
> > > > > > > On Tue, May 5, 2009 at 9:09 PM, oso che bol <ndlgroup1@xxxxxxxxx
> > >
> > > > wrote:
> > > > > > >
> > > > > > > > Hi Jan,
> > > > > > > >
> > > > > > > > Thanks you for your information.
> > > > > > > >
> > > > > > > > I will try to deploy GnuGk as a Proxy mode. I will be back when
> > > > some
> > > > > > > > difficult issues occur.
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > -LN
> > > > > > > >
> > > > > > > >
> > > > > > > > On Tue, May 5, 2009 at 5:12 PM, Jan Willamowius <
> > > > jan@xxxxxxxxxxxxxx
> > > > > > >wrote:
> > > > > > > >
> > > > > > > >> Hi,
> > > > > > > >>
> > > > > > > >> when you switch GnuGk to proxy mode, GnuGk will act as a RTP
> > proxy
> > > > > > > >> itself. See http://www.gnugk.org/gnugk-manual-5.html#ss5.2
> > > > > > > >> You might not even need the internal gatekeeper in such a
> > scenario
> > > > if
> > > > > > > >> both external and internal endpoints can reach GnuGk on the
> > public
> > > > IP.
> > > > > > > >>
> > > > > > > >> If your endpoints support it, you might want to check out the
> > CVS
> > > > > > > >> version that supports H.460.18 that will even allow endpoints
> > > > access
> > > > > > > >> that are firewalled.
> > > > > > > >>
> > > > > > > >> Regards,
> > > > > > > >> Jan
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> oso che bol wrote:
> > > > > > > >> > Hi list,
> > > > > > > >> >
> > > > > > > >> > i am too new to this list.
> > > > > > > >> >
> > > > > > > >> > I have a question. May i use this scenario?
> > > > > > > >> > UA (private IP) --Internet-- GnuGK (public IP) + rtpproxy --
> > > > > > Internal
> > > > > > > >> > Network --- Internal GK --- Internal H323 User.
> > > > > > > >> >
> > > > > > > >> > Could anyone pls confirm if I could use GnuGK with Rtpproxy
> > as
> > > > SIP
> > > > > > use?
> > > > > > > >> Or
> > > > > > > >> > there are any modules/features of GnuGk do the same with
> > > > > > gnugk+rtpproxy?
> > > > > > > >> >
> > > > > > > >> > Thanks,
> > > > > > > >> > -LN
--
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
