I'm wondering if someone can help me figure out what I'm missing. I've been running an GnuGK on 2.2.2 for many years, and have recently implemented a secondary GnuGK on 2.2.7. I've used pretty much the same config file for both GK. However, I am currently unable to receive calls from neighbored GKs on the gatekeeper running 2.2.7. So if my GK_A is my 2.2.2 gatekeeper, and GK_B is my 2.2.7 gatekeeper, I have a colleague running a GK_C that is a Polycom Path Navigator. GK_C is neighbored to both GK_A and GK_B with different prefixes. Using Wireshark I can see that calls from GK_C to GK_A process fine. But on calls from GK_C to GK_B, the 2.2.7 gatekeeper replies to his Setup message with a ReleaseComplete. I can make calls between endpoints registered on GK_B fine, and I can actually call from an endpoint on GK_B to GK_C successfully. I can also make calls between GK_A and GK_B successfully. I believe that I have the basic peering configurations set appropriately. [RoutedMode] AcceptNeighborsCalls=1 [RasSrv::Neighbors] GK_C=72.233.250.179;298,0011479298 And the fact that this same configuration works on my GnuGK running 2.2.2 confuses me. Am I missing a new parameter that was introduced in later revs? Thanks, -Jeremy Jeremy Wu Network Engineer, Customer Services UW Technology Services University of Washington Box 355675 Seattle, WA 98105-5675 (Tel) 206-543-1981 (Fax) 206-685-7755 ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
