remote MyPhone Doesn't find the GK!

["Hooman Mirhadi" <mirhadi@xxxxxxxxx>]

Hi List

I'm a new user of gnugk.

I've sarted gnugk as a windows service using gksvctrl.exe on a WinXP with the IP 192.168.72.58 subnet:255.255.255.0

Starting the Myphone on the same system,It doesn't find the GK automatically. When I choose "Discover by host" in myphone GK Settings and inserting the 192.168.72.58 as the GK Address, It shows the following msg and connects to the GK

Successfully registered with Gatekeeper: GnuGk@WINCLIENT

 

**My first question is that "Why doesn't It find the GK automatically"

 

When I try to use Myphone on another WinXP with the IP 192.168.72.12 subnet:255.255.255.0 it screams the error:

ERROR! Could not find a gatekeeper at 192.168.72.58

It's noticeable that I can ping the 192.168.72.58 from the remote system.

 

**My second question is "why can't MyPhone connect to the GK?"

 

the configuration file of gnugk is as bellow:

; this is a basic startup configuration for GnuGk
; it allows anyone to register and make calls

[Gatekeeper::Main]
FortyTwo=42
Name=GnuGk
EndpointSuffix=_gnugk
TimeToLive=60
; change this to 1 or 2, if you want CDRs and RAS messages to be printed on the status port
StatusTraceLevel=0
; enable these options if your endpoints use broadcast and/or multicast to discover the gatekeeper
UseBroadcastListener=1
UseMulticastListener=1

; restrict access to the status port by an IP address
[GkStatus::Auth]
rule=explicit
; add more entries, if you access the status port from other hosts
127.0.0.1=allow
default=forbid
Shutdown=allow

[RoutedMode]
; enable gatekeeper signaling routed mode, route H.245 channel only if neccessary (for NATed endpoints)
GKRouted=1
H245Routed=0
; you may want to change it to the H.323 default 1720
CallSignalPort=1721
AcceptNeighborCalls=1
AcceptUnregisteredCalls=1
RemoveH245AddressOnTunneling=1
RemoveCallOnDRQ=0
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=0
SupportNATedEndpoints=1
TranslateFacility=1

; proxy calls only for NATed endpoints
[Proxy]
Enable=0
; if port forwarding is correctly configured for each endpoint, you can disable ProxyForNAT
ProxyForNAT=1
ProxyForSameNAT=0

[RasSrv::RRQFeatures]
; endpoint identifiers are assigned by the gatekeeper
AcceptEndpointIdentifier=0
; you may want to disable this, if you want to control gateway prefixes from the config
AcceptGatewayPrefixes=1

[RasSrv::ARQFeatures]
; allow calling endpoints directly by an IP address
CallUnregisteredEndpoints=1

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV

_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/