|
The requirement looks a little weird.
Usually GW is the one that will send RRQ to GK and will try to register itself
into the GK and to achieve that proper configuration has to be done inside the
GW. I didn't understand why you were trying to register your GNUGK in a
GW.
The way that I saw your network, the
terminating GW is not even yours so I don't see any reason for registering the
GW into your GK. You can just add that GW as a permanent end point into your
GNUGK configuration and route the prefixes which that GW is supposed to
terminate through PSTN. Nothing
more is needed.
Bahram.
----- Original Message -----
Sent: Wednesday, March 08, 2006 1:12
PM
Subject: GnuGk Call
Termination With PSTN Gateway
Hi,
I am quite new to GnuGk but for about a week I have been
working on a
project which provides H.323 services with PostgreSQL
authentication and
accounting. Until now I have no problems with achieving
authentication
of endpoint users via SQLPasswordAuth. Unfortunately I am
stuck on a
problem with the PSTN termination for quite a while. I am
running the
GnuGk v.2.2.3 in full proxy mode on a FedoraCore box and I
have been
given only the IP address of the PSTN Gateway with the assurance
that I
am authorized by IP to the Gateway so it shouldn't be a problem to
use
it as a termination facility to the PSTN network. So far so
good...Here
is a sample of my configuration file where I specify the
routing policy
and my attempt to register with the
Gateway
[Endpoint]
H323ID=gw1
Gatekeeper=xxx.xxx.xxx.xxx
Type=Gateway
[RasSrv::PermanentEndpoints]
xxx.xxx.xxx.xxx=gw1;00
[RasSrv::GWPrefixes]
gw1=00
[RasSrv::RewriteE164]
%%.=.
[RasSrv::RRQFeatures]
AcceptEndpointIdentifier=1
AcceptGatewayPrefixes=0
OverwriteEPOnSameAddress=1
IRQPollCount=0
[RasSrv::ARQFeatures]
CallUnregisteredEndpoints=0
ArjReasonRouteCallToGatekeeper=0
[RoutedMode]
GKRouted=1
H245Routed=1
CallSignalPort=1720
AcceptNeighborCalls=1
AcceptUnregisteredCalls=1
RemoveH245AddressOnTunneling=1
RemoveCallOnDRQ=0
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=1
SupportNATedEndpoints=1
TranslateFacility=1
SetupTimeout=8000
SignalTimeout=10000
AlertingTimeout=180000
SocketCleanupTimeout=5000
[Proxy]
Enable=1
ProxyForNAT=1
ProxyForSameNAT=1
[RoutingPolicy]
Default=explicit
I
have read form many sources that the gateway should be configured in a
way
that it can send RRQs to the GnuGk and therefore be able to register
with
it. I was wondering whether my configuration makes any sense as I
don't
have access to the Gateway( only the assurance that it will
authorize my
requests by IP). I will supply the trace messages from the
GnuGk in mode
-tt
2006/03/08 19:54:57.358
2
GkClient.cxx(825) GKC Discover
GK
62.244.175.174:1719 at 193.193.162.71
2006/03/08 19:54:57.360
2
RasSrv.cxx(233) RAS Send RRQ
to
62.244.175.174:1719
2006/03/08 19:55:00.362
2
RasSrv.cxx(233) RAS Send RRQ
to
62.244.175.174:1719
2006/03/08 19:55:03.366
2
RasSrv.cxx(233) RAS Send RRQ
to
62.244.175.174:1719
As you can see the GnuGk sends regular registration
requests to the
gateway but there isn't a RCF. Due to the inability of the
GnuGk to
register with the Gateway I can't make any calls and receive the
following messages with errors of kind
calledPartyNotRegistered
2006/03/08 20:06:01.551
2
Toolkit.cxx(457)
RewritePString: 0035929xxxxxx to 35929xxxxxx
2006/03/08 20:06:01.552
2
RasSrv.cxx(388)
ARJ|192.168.2.122:3701|35929800667:dialedDigits|123:h323_ID=123:dialedDigits|false|calledPartyNotRegistered;
2006/03/08
20:06:01.552
2
RasSrv.cxx(233) RAS Send ARJ
to
213.91.220.218:3700
I am frankly asking for help from those of you who
are more experienced
with GnuGk. The main issue that concerns me is
whether the problem is
caused by my mistakes or indeed there should be
some configuration
settings to be made from the side of the gateway.
Thanks in advance.
Regards,
--Angel
Ivanov
-------------------------------------------------------
This
SF.Net email is sponsored by xPML, a groundbreaking scripting language
that
extends applications into web and mobile media. Attend the live webcast
and
join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________________
Posting:
mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive:
http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe:
http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage:
http://www.gnugk.org/
| 