I think there was too much information in my last post so let me cut it to
the principal;
How can I verify what is going wrong with a gateway not able to register
onto GnuGK when the only line I get is:
LCF|216.48.176.54|2667_endp|212374229843#553334214558:dialedDigits|216.48.176.54;
Could it be codec negotiation ? how can I check that ?
Thanks for any hint !
Fred
----- Original Message -----
From: "Frederic Jean"
To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, January 05, 2006 11:24
Subject: Cisco 7206xvr not registering on GnuGK - Help !
How are you folks,
I am a starter with GnuGK but have succeded in connecting end points
direcly to it and making calls but I am failing at interconnecting with
another Gatekeeper...
I urgently need help as it is related to my work... :- )
I have this scenario that works: SJPhone -> GnuGK -> Asterisk
and this one that fails : Cisco 7206vxr -> GnuGk -> Asterisk
I am using tech prefixes in front of the phone numbers to redirect to
the correct gateway. In this case I have two.
The Cisco is identified with "dollar" in the config and the asterisk
registers
with a tech prefix.
Ideally I would like to validate end points and other gatekeepers just
with their
Ip address, I have succeded in doing this using SJPhone and putting its IP
in the FileIPAuth..but not with the gatekeeper, here is the info below.
Cheers,
Frederic
---
[Gatekeeper::Main]
Fourtytwo=42
Name=SunNETGK
Home=0.0.0.0
TimeToLive=300
TotalBandwith=-1
StatusPort=7045
SignalCallId=1
StatusTraceLevel=2
TimeStampFormat=MySQL
EncryptAllPasswords=0
UseBroadcastListener=1
MulticastGroup=123.0.0.0
[GkStatus::Auth]
Shutdown=forbid
DelayReject=3
[LogFile]
Rotate=Weekly
RotateDay=Tue
RotateTime=03:30
[RoutedMode]
GKRouted=1
H245Routed=1
CallSignalPort=0
CallSignalHandlerNumber=5
RtpHandlerNumber=5
AcceptNeighborsCalls=1
AcceptUnregisteredCalls=1
RemoveH245AddressOnTunneling=1
RemoveCallOnDRQ=0
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=1
SupportNATedEndPoints=1
ForwardOnFacility=0
ShowForwarderNumber=0
Q931PortRange=20000-20999
H245PortRange=30000-30999
TcpKeepAlive=1
[RasSrv::LRQFeatures]
ForwardHopCount=30
AcceptForwardedLRQ=1
CISCOGKCompatible=1
Neighbortimeout=15
[RasSrv::PermanentEndpoints]
[Gatekeeper::Auth]
FileIPAuth=sufficient;RRQ,LRQ,Setup
default=allow
[RoutingPolicy::OnLRQ]
default=neighbour,explicit,internal,numberanalysis
[RasSrv::Neighbors]
dollar=216.48.176.54;*;;0
[Neighbor::dollar]
GatekeeperIdentifier=dollar
Host=216.48.176.54
AcceptPrefixes=*
[FileIPAuth]
66.165.170.221=allow
;My ADSL
201.9.209.56=allow
;dollar
216.48.176.54=allow
any=allow
[RasSrv::GWRewriteE164]
[PrefixAuth]
ALL=allow
[Gatekeeper::Acct]
default=accept
and this is what the guy with the cisco gets. The guy IP is 216.48.176.54
:
PeerAddress=212374229843#553334214558
DisconnectCause=15
DisconnectText=call rejected (21)
and this is the only line I get on the gnugk:
LCF|216.48.176.54|2667_endp|212374229843#553334214558:dialedDigits|216.48.176.54;
if i put my ip in the fileipauth section and use SJphone to connect with
the same prefix (212374229843#) it works perfectly, anobody has a small
hint about this ? I am really stuck on this one since I dont get any error
message.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
