RE: RADAUTH RadAuth RRQ auth failed: tokens not found

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A reachable NTP IP Address is required in ATA configuration.

Deepak Singhal
________________________________

From: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx
[mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Shashi
Dahal
Sent: Monday, October 24, 2005 7:48 PM
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject:  RADAUTH RadAuth RRQ auth failed: tokens not
found


Hi,

I followed this page: http://www.gnugk.org/gnugk-cisco-ata.html
and am usign sqlbill/freeradius/postgresql

I am getting the following in the gnugk log


2005/10/24 12:04:21.851 1             RasSrv.cxx(343)   RAS     RRQ Received
2005/10/24 12:04:21.852 3            radauth.cxx(1239)  RADAUTH RadAuth RRQ
auth failed: tokens not found
2005/10/24 12:04:21.852 3             gkauth.cxx(968)   GKAUTH  RadAuth RRQ
check failed
2005/10/24 12:04:21.853 2             RasSrv.cxx(388)
RRJ|192.168.1.101|123456:h323_ID=123456:dialedDigits|terminal|securityDenial
;
2005/10/24 12:04:21.854 3             RasSrv.cxx(231)   RAS     Send to
192.168.1.101:1027



db structure is the following:

voipdb=> select * from voipuser where id='1';
 id | h323id | accountid | disabled | checkh323id | chappassword |
allowedaliases | assignaliases | framedip | firstname | surname |
terminating
----+--------+-----------+----------+-------------+--------------+----------
------+---------------+----------+-----------+---------+-------------
  1 | user1  |         1 | f        | t           | pass1        | 123456
|               |          | User-01   | Voip-01 | t
(1 row)



gnugk setting  ----


[RasSrv::RRQAuth]
default=allow

[Endpoint]
Password=MyPass

[Proxy]
Enable=1
ProxyForNAT=1

[RasSrv::RRQFeatures]
AcceptGatewayPrefixes=1
OverwriteEPOnSameAddress=1
AcceptEndpointIdentifier=1

[RasSrv::ARQFeatures]
ArjReasonRouteCallToSCN=1
ArjReasonRouteCallToGatekeeper=1
CallUnregisteredEndpoints=1
RemoveTrailingChar=#
ParseEmailAliases=1

[RasSrv::LRQFeatures]
NeighborTimeout=2
ForwardHopCount=2
AlwaysForwardLRQ=1
AcceptForwardedLRQ=1
IncludeDestinationInfoInLCF=1
CiscoGKCompatible=1

[Gatekeeper::Auth]
RadAuth=required;RRQ,ARQ
NeighbourPasswordAuth=required
default=allow

[RadAuth]
Servers=92.168.150.128:1812
SharedSecret=secret
LocalInterface=192.168.150.128
AppendCiscoAttributes=1
IncludeEndpointIP=1

[Gatekeeper::Acct]
RadAcct=required;start,stop
default=accept

[RadAcct]
Servers=192.168.150.128:1813
LocalInterface=192.168.150.128
SharedSecret=secret
RequestRetransmissions=4
RoundRobinServers=1
AppendCiscoAttributes=1

[RasSrv::GWPrefixes]
GW=*

[RasSrv::PermanentEndpoints]
192.168.150.250=GW;*



Where  am I missing something to allow h323id based authentication


Cheers,
Shashi 




-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.
Get Certified Today * Register for a JBoss Training Course
Free Certification Exam for All Training Attendees Through End of 2005
Visit http://www.jboss.com/services/certification for more information
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux