|
can you check in the debug what is really going
on?
Btw, nowhere in your gatekeeper config I found the
RRQAuth part.
You have to "allow" the RAS registration of the
endpoint at GnuGK.
----- Original Message -----
Sent: Wednesday, September 21, 2005 4:57
AM
Subject: H.225 RAS
admission request
i also change the call signal port :1720 but its didn't
work
still show RAS registration reject
Are you sure it is OK that your call signal port is
1719?
Usually iti s 1720.
----- Original Message -----
From: teresa
To: openh323gk-users@li...
Sent: Thursday, September 15, 2005 11:43 AM
Subject:
H.225 RAS admission request
Hello:
i desire to call VOIP in 2 gateway
192.168.141.215/216 each other through gatekeeper :
192.168.141.175 .
it had problem in H.225 RAS admission reject. below my
gatekeeper.ini set :
[Gatekeeper::Main]
FourtyTwo=42
Name=GnuGk
EndpointSuffix=_gnugk
TimeToLive=600
; change this to 1 or 2, if you want CDRs
and RAS messages to be printed on the status
port
TotalBandwidth=100000
StatusPort=7000
StatusTraceLevel=2
; enable these options if your
endpoints use broadcast and/or multicast to discover
the
gatekeeper
UseBroadcastListener=0
UseMulticastListener=0
; restrict access to the status
port by an IP address
[GkStatus::Auth]
rule=allow
; add more
entries, if you access the status port from other hosts
;192.168.141.175=allow
;default=forbid
;Shutdown=allow
[RoutedMode]
;
enable gatekeeper signaling routed mode, route H.245 channel only if
neccessary (for
NATed endpoints)
GKRouted=1
H245Routed=0
; you may want
to change it to the H.323 default 1720
CallSignalPort=1719
AcceptNeighborCalls=1
AcceptUnregisteredCalls=0
RemoveH245AddressOnTunneling=1
RemoveCallOnDRQ=0
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=0
SupportNATedEndpoints=1
TranslateFacility=1
; proxy calls only for NATed
endpoints
[Proxy]
Enable=1
; if port forwarding is correctly configured for
each endpoint, you can disable
ProxyForNAT
T120PortRange=40000-40999
RTPPortRange=50000-59999
ProxyForNAT=1
ProxyForSameNAT=0
[GkStatus::Auth]
rule=allow
[RasSrv::GWPrefixes]
gw215=215
gw216=216
[RasSrv::PermanentEndpoints]
192.168.141.215=gw215;215
192.168.141.216=gw216;216
[RasSrv::RRQFeatures]
; endpoint identifiers are assigned
by the gatekeeper
AcceptEndpointIdentifier=0
; you may want to disable this,
if you want to control gateway prefixes from the config
AcceptGatewayPrefixes=1
[RAre you sure it is OK
that your call signal port is 1719?
Usually iti s 1720.
----- Original Message -----
From:
teresa
To: openh323gk-users@xxxxx
Sent:
Thursday, September 15, 2005 11:43 AM
Subject:
H.225 RAS admission request
Hello:
i desire to call VOIP in 2 gateway
192.168.141.215/216 each other through gatekeeper :
192.168.141.175 .
it had problem in H.225 RAS admission reject. below my
gatekeeper.ini set :
[Gatekeeper::Main]
FourtyTwo=42
Name=GnuGk
EndpointSuffix=_gnugk
TimeToLive=600
; change this to 1 or 2, if you want CDRs
and RAS messages to be printed on the status
port
TotalBandwidth=100000
StatusPort=7000
StatusTraceLevel=2
; enable these options if your
endpoints use broadcast and/or multicast to discover
the
gatekeeper
UseBroadcastListener=0
UseMulticastListener=0
; restrict access to the status
port by an IP address
[GkStatus::Auth]
rule=allow
; add more
entries, if you access the status port from other hosts
;192.168.141.175=allow
;default=forbid
;Shutdown=allow
[RoutedMode]
;
enable gatekeeper signaling routed mode, route H.245 channel only if
neccessary (for
NATed endpoints)
GKRouted=1
H245Routed=0
; you may want
to change it to the H.323 default 1720
CallSignalPort=1719
AcceptNeighborCalls=1
AcceptUnregisteredCalls=0
RemoveH245AddressOnTunneling=1
RemoveCallOnDRQ=0
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=0
SupportNATedEndpoints=1
TranslateFacility=1
; proxy calls only for NATed
endpoints
[Proxy]
Enable=1
; if port forwarding is correctly configured for
each endpoint, you can disable
ProxyForNAT
T120PortRange=40000-40999
RTPPortRange=50000-59999
ProxyForNAT=1
ProxyForSameNAT=0
[GkStatus::Auth]
rule=allow
[RasSrv::GWPrefixes]
gw215=215
gw216=216
[RasSrv::PermanentEndpoints]
192.168.141.215=gw215;215
192.168.141.216=gw216;216
[RasSrv::RRQFeatures]
; endpoint identifiers are assigned
by the gatekeeper
AcceptEndpointIdentifier=0
; you may want to disable this,
if you want to control gateway prefixes from the config
AcceptGatewayPrefixes=1
[RasSrv::ARQFeatures]
; allow calling endpoints directly
by an IP address
CallUnregisteredEndpoints=1
[CallTable]
; don't print CDRs for neighbor calls to the
status port
GenerateNBCDR=0
; print
CDRs for unconnected calls to the status port
GenerateUCCDR=1
asSrv::ARQFeatures]
; allow calling endpoints
directly by an IP address
CallUnregisteredEndpoints=1
[CallTable]
; don't print CDRs for neighbor calls to the
status port
GenerateNBCDR=0
; print
CDRs for unconnected calls to the status port
GenerateUCCDR=1
|
