Hello openh323gk-users,
Why in inquiry radius attribute User-Name in Authentication_Request not meet attribute User-Name in Accounting_Request?
nsg800(102) -> Alterteks ProxySoftSwitch -> gnugk(RewriteCLI 102 to pss) -> nsg800(sasha)
|
\/
radius -> billing
RadAliasAuth - does not work correctly
NFO 18.09.2005 18:13:05 Thread[Thread-146,5,main] AUTH:
Type=AUTHENTICATION_REQUEST
Attributes:
NAS-Identifier=Metro
User-Password=??1B???P?,Z?? 1
NAS-IP-Address=XXX.XXX.XXX.11
Called-Station-Id=201
Framed-IP-Address=192.168.100.120
Service-Type=10
Calling-Station-Id=pss !!!!!!???? correctly
NAS-Port-Type=5
User-Name=sasha !!!!!???? Not correctly!!! Should be - pss!!
h323-gw-id=Metro
h323-conf-id=2221440 AFCF1EEA 27470001 A8010AF9
h323-call-origin=answer
h323-call-type=VoIP
INFO 18.09.2005 18:13:05 Thread[Thread-146,5,main] RESPONSE:
............
........
INFO 18.09.2005 18:13:08 Thread[Thread-147,5,main] ACCOUNT:
Type=ACCOUNTING_REQUEST
Attributes:
NAS-Identifier=Metro
Acct-Delay-Time=0
NAS-IP-Address=XXX.XXX.XXX.11
Called-Station-Id=201
Framed-IP-Address=YYY.YYY.YYY.162
Acct-Status-Type=2
Service-Type=1
Calling-Station-Id=pss !!!! - correctly
User-Name=pss !!!! - correctly
NAS-Port-Type=5
Acct-Session-Time=0
Acct-Session-Id=432d74a900000002
h323-setup-time=18:10:48.000 MSD Sun Sep 18 2005
h323-gw-id=Metro
cisco-avpair=h323-ivr-out=h323-call-id:8C0B4C0C 94752D43 6C040000 46464636
h323-disconnect-time=18:10:51.000 MSD Sun Sep 18 2005
h323-conf-id=2221440 AFCF1EEA 27470001 A8010AF9
h323-disconnect-cause=10
h323-call-origin=proxy
h323-remote-address=192.168.100.120
h323-call-type=VoIP
INFO 18.09.2005 18:13:08 Thread[Thread-147,5,main] RESPONSE:
Type=ACCOUNTING_RESPONSE
>From behind it billing charges to the Called, and owes Calling!!!
if use RadAuth - is ok!
Why!!!!????????
That is not correct ????????
My config:
[Gatekeeper::Main]
Fourtytwo=42
Name=Metro
Home=XXX.XXX.XXX.11;XXX.XXX.XXX.201
TotalBandwidth=64000
TimeToLive=600
[GkStatus::Auth]
rule=explicit
192.168.100.10=1
[RoutedMode]
GKRouted=1
H245Routed=0
CallSignalPort=1720
SupportNATedEndpoints=1
SendReleaseCompleteOnDRQ=1
RemoveH245AddressOnTunneling=1
RemoveCallOnDRQ=1
DropCallsByReleaseComplete=1
TcpKeepAlive=1
RtpHandlerNumber=2
Q931PortRange=2000-19999
H245PortRange=2000-19999
AcceptNeighborsCalls=1
AcceptUnregisteredCalls=1
[Proxy]
Enable=1
ProxyForNAT=1
ProxyForSameNAT=1
[RoutingPolicy]
default=internal,neighbor
[RoutingPolicy::OnARQ]
default=internal,neighbor
[RasSrv::RewriteE164]
8=7
783108=
[RasSrv::RRQFeatures]
AcceptEndpointIdentifier=1
AcceptGatewayPrefixes=1
[RasSrv::ARQFeatures]
CallUnregisteredEndpoints=1
[Gatekeeper::Auth]
RadAliasAuth=optional;ARQ
default=allow
[RadAliasAuth]
Servers=192.168.100.11:1812
AppendCiscoAttributes=1
IncludeTerminalAliases=0
SharedSecret=12345
RequestRetransmissions=1
RequestTimeout=2000
[Gatekeeper::Acct]
RadAcct=optional;stop
default=allow
[RadAcct]
Servers=192.168.100.11:1813
SharedSecret=12345
AppendCiscoAttributes=1
RequestRetransmissions=1
[RasSrv::Neighbors]
GK1=GnuGK
[RasSrv::LRQFeatures]
IncludeDestinationInfoInLCF=1
[Neighbor::GK1]
GatekeeperIdentifier=GK1
Host=YYY.YYY.YYY.162
SendPrefixes=7
AcceptPrefixes=783108
AcceptForwardedLRQ=0
[CallTable]
GenerateUCCDR=1
DefaultCallDurationLimit=3600
AcctUpdateInterval=10
TimestampFormat=Cisco
[RewriteCLI]
out:any=YYY.YYY.YYY.YYY any=10001
in:YYY.YYY.YYY.YYY=any=pss
>From behind it billing charges to the Called, and owes Calling!!!
if use RadAuth - is ok!
Why!!!!????????
That is not correct ????????
--
Best regards, Anistratov AD mailto:sasha675@xxxxxxxxЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪр;С^╣И ┼X╛╡ '╡┼чu╪ЪM╘·й▀╚uКч√┼fz{\┘╘ezx Ё╜└ZrЪ╟g╚╒x╕═iIЙОz©цё Е║╖b╣З+~╥·ЪЖ╖u╥··в╚yшhб)зЦoИ∙╚&jшХ╞*.╝В╚й▄'J┴РЧыЪ=#ЪX°▓╚zз)∙╛Ъ├шiЪЪЛ╒ЙэyЗ+│ОГzъЮz╨'┼jЪ╕ЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪЪСХ╡ь╖┐Ы ┼[hЭЙ^· Жч Ъ╨г╚ЁЫb╡шЪ╡▀╚qГХ╝Ъ²К@╜хb╫ОА╤зЪЪШ(╨╥ ~┼Ю{Ыч╥Ы ┼V╚r╞{ВХ╝ИЪ╕Ъ~┼Н⌡Ь²УIЛ╧╩ ╝&чЧm╖ЪЪ√+-ЁШ(╨╥ ~┼Ю{Ыч╥Ыb╡ш?√+-┼wХЧ┼^· Жч Ъ╨г╚╟z&z√═{Ьm╤÷ЪЪ 0Ч Н┌OХ
