If the two GKs are connected without any NAT or firewalls between them, it's probably just a port mismatch. By default, gnugk listens for Setup on port 1721, so that a VoIP endpoint application can run on the same machine. You can change this to the usual 1720 by: [RoutedMode] CallSignalPort=1720 If you need to stay with port 1721, use: [RasSrv::PermanentEndpoints] 192.168.2.218:1721=GK_A;1 If you have already done this, please describe your network configuration, including any NATs or firewalls in your system. --Stewart ----- Original Message ----- From: <hwang@xxxxxxxxxxxx> To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx> Sent: Monday, March 14, 2005 7:23 PM Subject: Connet two gatekeepers > I'm trying to connect 2 GKs. > Version 2.2.0 is used in both GK. > GK_A has an EP registed to it with alias 1001, GK_B has an EP registed > to it with alias 2001. > In GK_B, I set GK_A as Permanent EP like > [RasSrv::PermanentEndpoints] > 192.168.2.218=GK_A;1 > When I dial 1001 from 2001, I see an ACF from the status port, right > after that I get a DCF. > By tracing the log in GK_B, I get : > ProxyChannel.cxx(1984) Q931 192.168.2.218:1720 DIDN'T ACCEPT THE CALL > where 192.168.2.218 is the IP for GK_A. > But in GK_A, nothing related to GK_B in the log. > Please help me to find out the problem. > Thanks. ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
