Hello,
I install gnugk and configure the sqlbill from contrib directory. I follow all the instructions to install and configure freeradius, postgresql and gnugk. I can run gnugk, freeradius and postgresql server successfully. But when i try to register an end point, its shows registration reject. Here is below the failed log information of gnugk,
2005/03/01 13:24:19.015 3 radproto.cxx(2118) RADIUS Receive response from RADIUS server failed (id:246)
2005/03/01 13:24:19.016 2 radauth.cxx(317) RADAUTH RadAuth RRQ auth failed: could not receive or decode response from RADIUS
2005/03/01 13:24:19.016 3 gkauth.cxx(984) GKAUTH RadAuth RRQ check failed
2005/03/01 13:24:19.016 2 RasSrv.cxx(373) RRJ|69.88.15.244|jami:h323_ID|terminal|undefinedReason;
2005/03/01 13:24:19.017 3 RasSrv.cxx(219) RAS Send to 69.88.15.244:2814
registrationReject {
requestSeqNum = 18293
protocolIdentifier = 0.0.8.2250.0.4
rejectReason = undefinedReason <<null>>
gatekeeperIdentifier = 10 characters {
004f 0070 0065 006e 0048 0033 0032 0033 OpenH323
0047 004b GK
}
}
2005/03/01 13:24:19.017 5 RasSrv.cxx(233) RAS Sent Successful
2005/03/01 13:24:19.018 5 job.cxx(423) JOB Job RRQ deleted
2005/03/01 13:24:19.018 5 job.cxx(412) JOB Worker threads: 6 total - 5 busy, 1 idle
2005/03/01 13:24:19.016 2 radauth.cxx(317) RADAUTH RadAuth RRQ auth failed: could not receive or decode response from RADIUS
2005/03/01 13:24:19.016 3 gkauth.cxx(984) GKAUTH RadAuth RRQ check failed
2005/03/01 13:24:19.016 2 RasSrv.cxx(373) RRJ|69.88.15.244|jami:h323_ID|terminal|undefinedReason;
2005/03/01 13:24:19.017 3 RasSrv.cxx(219) RAS Send to 69.88.15.244:2814
registrationReject {
requestSeqNum = 18293
protocolIdentifier = 0.0.8.2250.0.4
rejectReason = undefinedReason <<null>>
gatekeeperIdentifier = 10 characters {
004f 0070 0065 006e 0048 0033 0032 0033 OpenH323
0047 004b GK
}
}
2005/03/01 13:24:19.017 5 RasSrv.cxx(233) RAS Sent Successful
2005/03/01 13:24:19.018 5 job.cxx(423) JOB Job RRQ deleted
2005/03/01 13:24:19.018 5 job.cxx(412) JOB Worker threads: 6 total - 5 busy, 1 idle
And here is below the freeradius log information,
rad_recv: Access-Request packet from host 127.0.0.1:24380, id=246, length=128
User-Name = "jami"
CHAP-Password = 0xd68721ca21575f8477c961d285266f920c
CHAP-Challenge = 0x422418c6
NAS-IP-Address = 69.88.15.250
NAS-Identifier = "OpenH323GK"
NAS-Port-Type = Virtual
Service-Type = Login-User
Framed-IP-Address = 69.88.15.244
Cisco-AVPair = "h323-ivr-out=terminal-alias:jami;"
rlm_chap: Setting 'Auth-Type := CHAP'
rlm_chap: login attempt by "jami" with CHAP password
rlm_chap: Could not find clear text password for user jami
Sending Access-R eject of id 246 to 127.0.0.1:24380
User-Name = "jami"
CHAP-Password = 0xd68721ca21575f8477c961d285266f920c
CHAP-Challenge = 0x422418c6
NAS-IP-Address = 69.88.15.250
NAS-Identifier = "OpenH323GK"
NAS-Port-Type = Virtual
Service-Type = Login-User
Framed-IP-Address = 69.88.15.244
Cisco-AVPair = "h323-ivr-out=terminal-alias:jami;"
rlm_chap: Setting 'Auth-Type := CHAP'
rlm_chap: login attempt by "jami" with CHAP password
rlm_chap: Could not find clear text password for user jami
Sending Access-R eject of id 246 to 127.0.0.1:24380
Please help me.
Thanks and regards,
JAMI
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
