Hello, I was just trying to set gnugk 2.2.0 on machine with multiple IP addresses (for multi-gk setup) to bind to particular IP address. However, all possible configurations always ended up with gnugk listening to machine's default Ip address AND localhost address. Example: machine default address: 10.0.0.1 aliases: 10.0.0.2 and 10.0.0.3 we want particular gnugk instance to listen to 10.0.0.2 config is like this: [Gatekeeper::Main] Fourtytwo=42 Name=gnugk StatusPort=7000 Home=10.0.0.2 NetworkInterfaces=10.0.0.2/32 UseBroadcastListener=0 it gives following debug at startup: 2004/12/02 22:21:27.587 2 singleton.cxx(28) Create instance: Toolkit(1) 2004/12/02 22:21:27.587 5 Toolkit.cxx(592) Try name /tmp/gnugk.ini-2052 2004/12/02 22:21:27.589 4 Toolkit.cxx(113) InterfaceTable: 10.0.0.1 (sis0) 127.0.0.1 (lo0) 2004/12/02 22:21:27.591 2 Toolkit.cxx(83) Network=10.0.0.0/255.255.255.0, IP=10.0.0.1 2004/12/02 22:21:27.591 2 Toolkit.cxx(83) Network=10.0.0.1/255.255.255.255, IP=10.0.0.1 2004/12/02 22:21:27.591 2 Toolkit.cxx(83) Network=10.0.0.3/255.255.255.255, IP=10.0.0.1 .... and so on for all interfaces on machine, then localhost.... 2004/12/02 22:21:27.591 2 Toolkit.cxx(83) Network=127.0.0.1/255.255.255.255, IP=127.0.0.1 2004/12/02 22:21:27.592 2 Toolkit.cxx(84) Default IP=10.0.0.1 2004/12/02 22:21:27.594 2 Toolkit.cxx(83) Network=0.0.0.0/0.0.0.0, IP=10.0.0.2 2004/12/02 22:21:27.594 2 Toolkit.cxx(84) Default IP=10.0.0.2 2004/12/02 22:21:27.591 2 Toolkit.cxx(83) Network=63.208.156.113/255.255.255.255, IP so it kind of detects Home address, but also detects all other addresses on machine and decides to listen to main and localhost: 2004/12/02 22:21:27.601 1 RasSrv.cxx(471) Listening to 10.0.0.1:1719(U) 2004/12/02 22:21:27.601 5 yasocket.cxx(670) RasServer total sockets 1 2004/12/02 22:21:27.602 1 RasSrv.cxx(471) Listening to 10.0.0.1:1718(Mcast) 2004/12/02 22:21:27.602 5 yasocket.cxx(670) RasServer total sockets 2 2004/12/02 22:21:27.602 1 RasSrv.cxx(471) Listening to 10.0.0.1:1720 2004/12/02 22:21:27.602 5 yasocket.cxx(670) TCPServer total sockets 1 2004/12/02 22:21:27.602 1 RasSrv.cxx(471) Listening to 10.0.0.1:7000 2004/12/02 22:21:27.602 5 yasocket.cxx(670) TCPServer total sockets 2 2004/12/02 22:21:27.602 1 RasSrv.cxx(471) Listening to 127.0.0.1:1719(U) 2004/12/02 22:21:27.602 5 yasocket.cxx(670) RasServer total sockets 3 2004/12/02 22:21:27.602 1 RasSrv.cxx(471) Listening to 127.0.0.1:1720 2004/12/02 22:21:27.602 5 yasocket.cxx(670) TCPServer total sockets 3 2004/12/02 22:21:27.602 1 RasSrv.cxx(471) Listening to 127.0.0.1:7000 2004/12/02 22:21:27.602 5 yasocket.cxx(670) TCPServer total sockets 4 Anyone has idea how to make it listen to "home" only? Needless to say, that till 2.0.9 it worked as expected regards, Aivis ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
