When you set Gatekeeper=no, then you tell the gatekeeper TO NOT REGISTER itself with its parent. You need to put IP there, like:
Gatekeeper=MY.PARENT.GATEKEEPER.IP
Also Prefix=* may be not the best idea, until you want to route numbers starting with '*'. You may want to put there Prefix=0,1,2,3,4,5,6,7,8,9
----- Original Message ----- From: "Ali Soltanifar" <ali.soltanifar@xxxxxxxxxxxxxxxx>
Sent: Tuesday, November 23, 2004 11:41 PM
I want to set my gatekeeper as a endpoint (gateway) My config is like below..
But it is not worked or maybe worked
I want to know when I used this setting witch port of my server is used for gatekeeper.
[Endpoint] Gatekeeper=no Type=Gateway Discovery=0 H323ID=mygate Prefix=* TimeToLive=900 RRQRetryInterval=10 ARQTimeout=2 UnregisterOnReload=0 NATRetryInterval=60 NATKeepaliveInterval=86400
Thanks all. Best Regards.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
