Only Single GK is required for this/ what is that GK config file. can u help me. ----- Original Message ----- From: "Stewart Nelson" <sn@xxxxxxxxxxx> To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx> Sent: Saturday, September 11, 2004 09:51 PM Subject: Re: gnugk behind NAT questions > Hi, > > This configuration works fine for me, and for hundreds of other happy > gnugk users. Many thanks to the developers for this functionality. > I don't even need to set ProxyForNAT in my production systems. > Here is a simplified description (assuming fast start, but that is > not necessary): > > 1. Registration, etc. has no problem because GK responds to whatever > port it got RAS packet from. > > 2. EP1 wants to call EP2, so sends ARQ to GK. GKRouted is on, so > ACF tells EP1 to send Setup to GK. > > 3. EP1 opens TCP connection to GK and sends Setup. Setup contains > OLC request to send audio to 192.168.1.1 port 10000. > > 4. GK knows real IP of EP2 (saved from registration) and opens TCP > connection to 90.90.2.2 port 1720. NAT2 has been administratively > configured (by port forwarding or DMZ) to forward the connection > to 192.168.2.1 . > > 5. EP2 accepts the connection, and GK sends the Setup. GK modifies the > contents so that EP2 is told to send audio to 80.80.1.1 port 10000. > > 6. After Connect, EP2 sends RTP (UDP) audio packets to 80.80.1.1 port 10000. > > 7. Audio packets arrive at NAT1, which has been administratively configured > to forward UDP port 10000 to 192.168.1.1 . > > 8. Audio packets arrive at EP1, happy caller hears 'hello' from other end :) > > --Stewart > > ----- Original Message ----- > From: "kompnet" <kompnet@xxxxxxxxx> > To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx> > Sent: Saturday, September 11, 2004 5:24 PM > Subject: Re: gnugk behind NAT questions > > > > Which configuration do you mean? > > > > <1-st ep 192.168.1.1>--<192.168.1.254 NAT1 80.80.1.1>--<212.211.2.2 GNUGK> > > | > > <2-nd ep 192.168.2.1>--<192.168.2.254 NAT2 90.90.2.2> > > > > If you want to establish connection in described configuration, foget about it > > because not only headers of packets contains information about ip addresses > > and ports, but also internal contents of packets contains information about > > real ip address of an endpoint and used ports. And you need not only change > > the ip-header, but internal content too. > > In it is the purpose of the gatekeeper in full proxy mode. > > You need 2 gnugk's installed on both NAT boxes. > > And you can't use hardware NAT, only computer with two interfaces configured > > as gateway. Or you need hardware NAT with full h323-proxy functionality. > > > > Regards, > > Igor > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 > Project Admins to receive an Apple iPod Mini FREE for your judgement on > who ports your project to Linux PPC the best. Sponsored by IBM. > Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php > > _______________________________________________________ > > List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
