Hello Frank, Saturday, September 18, 2004, 8:16:11 PM, you wrote: FF> Hi all FF> I need to rewrite E.164 numbers dynamically, means, when i get a call FF> request from A to B i have to look up a db or similar and check what number FF> to dial. I.e. if A has number 100 and dials number 999 i will have to route FF> to A to number 7777. If A has number 150 and dials number 999 i will have to FF> route A to number 8888. FF> As far as i understand, there is no way in the GnuGK to do this kind of FF> number rewriting dynamically, right? Only thing i found was number rewriting FF> based upon static rules. FF> Does anyone has an idea how i could do that kind of dynamical number FF> rewriting? If not with GnuGK, maybe with another piece of software? FF> Thanks a lot for your help. FF> Kind regards FF> Frank >> -----Ursprüngliche Nachricht----- >> Von: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx >> [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] Im >> Auftrag von Abano, Fernando A. (ePerformax) >> Gesendet: Samstag, 18. September 2004 18:31 >> An: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx >> Betreff: RE: Cisco DID routed to GNUgK >> >> Had it working on a 3662 using DNIS as destination-pattern and session >> target ras in the voip dial-peer. I would have wanted to have a >> dial-peer with the destination-pattern of the 10-digit ANI but don't >> know how yet. >> >> >> -----Original Message----- >> From: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx >> [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On >> Behalf Of Emil >> A. Baniqued >> Sent: Sunday, September 19, 2004 2:52 PM >> To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx >> Subject: Cisco DID routed to GNUgK >> >> >> >> Dear List, >> >> >> Anyone here have tried or implement on Cisco 3640 DID routed to GNUGK >> and gK >> will send to endpoint? >> >> This the scenario: >> >> PSTN---->CISCO3640----->GNUGK----->H323endpoint. >> >> Cisco has E1/T1 connect to local PSTN with xxxx pilot. When you called >> xxxx >> Cisco will send to GK and GK will reroute to destination >> endpoint. Is it >> >> possible? >> >> Any help will very much appreciated. >> >> Thanks, >> >> Emil >> You can realize this functionality using Radius. -- Best regards, ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,. Mike Tkachuk, ph:380-3433-47067 YES ISP, fx:380-3433-47067 Valova 17, mike|a|yes.net.ua Kolomyia, www.yes.net.ua Ukraine 78200 FWD: 66518 20.09.2004 ICQ# 57698805 MSN: mike_tkachuk|a|hotmail.com ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,. ------------------------------------------------------- This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM. Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Homepage: http://www.gnugk.org/
