Framed-IP-Address should always contain the IP address of an endpoint. If it is not, you can try the cvs version to see, if this (possibly) bug is fixed. ----- Original Message ----- From: "looperlistas looperlistas" <looperlistas@xxxxxxxxxxx> Sent: Thursday, August 05, 2004 9:21 PM > Hello! > I've configured gnugk v2.0.8 + freeradius. I'm using a hardware gateway > to make test. It registers within gnugk as an endpoint with 2 aliases > (h323id, e164). I can see that framed-ip-address sent from gnugk to > freeradius value is gnukg's IP not endpoint's IP. I'd like to test IP too to > allow or not allow access to endpoint to h323 zone. How can be tested IP if > gnugk is sending its own IP? You can see my RadAliasAuth config for gnugk > below: > > [RadAliasAuth] > Servers=localhost > SharedSecret=testing > AppendCiscoAttributes=1 > IncludeTerminalAliases=1 > IncludeEndpointIP=1 > FixedPassword=passwd > > > Best regards ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
