I changed my settings to Gkrouted=0, H245routed=0 and I am now able to call from a NATed EP to another EP on the DMZ. What would you recommend as a solution to the NAT to NAT problem? -----Original Message----- From: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Zygmuntowicz Michal Sent: Saturday, July 31, 2004 4:48 AM To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Subject: Re: Help 1. You should check neighbor configuration at the GK1 to see why it is rejecting LRQ from GK2. 2. If you call EP1<->EP2 and both are behind NAT and you do not use any special trick to traverse NAT, you will no be able to reach each other. ----- Original Message ----- From: "Abano, Fernando A. (ePerformax)" <fabano@xxxxxxxxxxxxxx> Sent: Friday, July 30, 2004 12:11 AM I have a setup as follows: GK1------>GW | | | GK2 <----NAT1----EP1 \ \ NAT2 \ EP2 When I try to call EP1 to EP2 or EP2 to EP1, I cannot get connected. When I try to dial a number from EP1 or EP2 to be sent to GW, I also cannot get the call connected. ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
