Hi all, I recently started experimenting with openh323 gatekeeper. I only have one problem related to my testing environment. The Cisco is in Direct Routing mode and the Voice application we are using (Swyx) is only able to talk in Gatekeeper Routed Mode. So my question is whether it is possible to put the Cisco in Gatekeeper Routed Mode? Any help would be greatly appreciated as I seem to be unable to find any info on this on the Cisco site. Regards, Rene Wijnings -----Original Message----- From: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Ray Jackman Sent: donderdag 1 juli 2004 23:20 To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Subject: Perm end points i discovered something i found interesting in section [RasSrv::PermanentEndpoints] # For gateway 10.0.1.5=Citron;009,008 if i change this to include another , after example 008 (now says 008,) . if have additional endpoints defined as above and dialed number does not match any other gateway it will send the call to this route. i think maybe the ending comma with no digits may allow GK to apply the routing rule to this endpoint. i wonder what would happen if i had 2 routes that had an additonal , after prefix, would it choose the first one? just curious mostly. regards ray ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
----------------------------------------- (on gateway01) email-body was scanned and no virus found ---------------------------------------------------------
