On Tuesday 25 May 2004 06:59, Zygmuntowicz Michal wrote: > Yes, it's easily done, but you need to edit the source code by hand. > > ----- Original Message ----- > From: "Exelon" <exelon@xxxxxxxx> > Sent: Tuesday, May 25, 2004 12:43 PM > > > My gw sends in H.225 setup message in field Bearer-Capability value 88 90 > > a5, i.e. "Unrestricted Digital Information" and I don't know how to > > change this field on my gw side. Is it possible to change this value in > > setup message before sending to target gw (i'm using gatekeeper in routed > > mode) on gatekeeper side to another value (e.g. to "speech" or "3.1 KHz > > Audio")? > this would be a good feature to have in the GK as some GWs improperly send this 88 or 90 in the bearer cap value and newer cisco IOS's fail calls unless you make some setting changes to force the cisco to modify this field before it sends it to a TDM switch. i have had this problem several times and have required the receiving ciscos to make the config changes. some are reluctant as you can assume. best regards ray ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
