GnuGk does not support itself H.450. But it should support this transparently (can someone confirm this?) ----- Original Message ----- From: "Matthias Bertschy" <matthias@xxxxxxxxxxx> Sent: Monday, April 19, 2004 3:32 PM > I am evaluating GnuGk for a rather small but intense use. > --> one Linux box running GnuGk > --> 5 Micronet SP5002 voip gateways > --> 1 Micronet SP5054 voip gateway > --> 2 Micronet SP5012 voip gateways > > The SP5002 and SP5054 support H.450 call hold and call transfert, so I > tried to transfer calls between them. > When I make a call and try to hold that call (as explained in Micronet's > documentation) with a Flash signal, the other calling party is > disconnected as said in the log: > DCF|192.168.11.50|9302_endp|20707|normalDrop; > > I configured the GnuGk a full router (which I think is needed to > transfer calls): > [RoutedMode] > GKRouted=1 > H245Routed=1 > > How can I make H.450 call transfer work? Is it implemented in GnuGk? (I > think yes because I saw few posts in the mailling list) > If not, does anybody has a better idea to easily transfer calls (given > that the users only have phones to transfer the calls). > > Thanks a lot. > > Matthias ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
