Hello Edmond, Saturday, January 31, 2004, 8:48:20 PM, you wrote: EL> Dear all, EL> EL> Can anyone told me how an "Unregistered Call" can EL> make calls to GNUGK. EL> Actually, I added "AcceptUnregisteredCalls=1" in EL> the RoutedMode section and add a dial-peer in the AS5300 gateway. EL> The AS5300 log shows that the call is routed to the EL> destinated IP but I cannot see any record in the debug log of EL> GNUGK. EL> EL> [RoutedMode] EL> GKRouted=1 EL> H245Routed=0 EL> CallSignalPort=1721 EL> SupportNATedEndpoints=1 EL> RemoveH245AddressOnTunneling=1 EL> AcceptUnregisteredCalls=1 EL> EL> [RasSrv::PermanentEndpoints] EL> xxx.xxx.xxx.xxx=test-gw;555 EL> Cisco AS5300 EL> EL> dial-peer voice 100 EL> voip EL> huntstop EL> destination-pattern EL> 1234.... EL> progress_ind setup enable 3 EL> session target EL> ipv4:xxx.xxx.xxx.xxx EL> tech-prefix 555 EL> ! EL> HK#sh call hist voice last 2 EL> PeerAddress=5551234xxxx EL> DisconnectCause=3 EL> DisconnectText=no route to EL> destination. EL> ConnectTime=0 EL> VOIP: EL> RemoteIPAddress=xxx.xxx.xxx.xxx EL> RemoteUDPPort=0 EL> RemoteSignallingIPAddress=xxx.xxx.xxx.xxx EL> RemoteSignallingPort=1720 EL> RemoteMediaIPAddress=0.0.0.0 EL> RemoteMediaPort=0 EL> EL> tks EL> Edmond Lo I thing the problem is here: Your gnugk configured to use 1721 port as signaling port: CallSignalPort=1721 and you cisco configured to use 1720 port: RemoteSignallingPort=1720 Try to change CallSignalPort=1721 to CallSignalPort=1720 -- Best regards, Mike mailto:mike@yes.net.ua ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Homepage: http://www.gnugk.org/
