Hello,
I am using gnugk-2.0.7 for windows. I've installed it on
an IP-gateway that connects two networks. One of these networks
is a "private" one (with 192.168.1.0-addresses), so the
gatekeeper has to route and proxy all connections from inside
out and vice versa.
I think my config file is ok for this configuration (attached
as gatekeeper_ancoso.ini). But the gatekeeper seems to ignore
the NAT-stuff, because the messages I receive in the "outer"
network still contain references to the 192.168.1.0 network, which
sould be hidden by the IP-gateway/gatekeeper-installation.
The following logfile is the log of the neighbor gatekeeper "GKHTWK"
(see config file).
213.196.135.134 is the "outer" IP of the IP-gateway where gnugk is
running.
The "reply address" field in the locationRequest obviously contains
192.168.1.11, which should by 213.196.135.134 instead (IMHO).
----------------
2004/01/28 11:52:28.812 2 RasSrv.cxx(144) RAS Read from 213.196.135.134:24699
2004/01/28 11:52:28.814 3 RasSrv.cxx(183) RAS
locationRequest {
requestSeqNum = 6
destinationInfo = 1 entries {
[0]=h323_ID 12 characters {
0073 0074 0065 0066 0061 006e 002e 0070 stefan.p
0061 006c 006d 0065 alme
}
}
replyAddress = ipAddress {
ip = 4 octets {
c0 a8 01 0b ....
}
port = 1719
}
sourceInfo = 1 entries {
[0]=h323_ID 16 characters {
0063 0068 0072 0069 0073 0074 0069 0061 christia
006e 002e 0067 0075 0062 0073 0065 0072 n.gubser
}
}
canMapAlias = FALSE
gatekeeperIdentifier = 8 characters {
0047 004b 0041 006e 0063 006f 0073 006f GKAncoso
}
hopCount = 4
}
2004/01/28 11:52:28.824 1 RasSrv.cxx(302) RAS LRQ Received
2004/01/28 11:52:28.826 2 RasSrv.cxx(347) LRJ|213.196.135.134|stefan.palme:h323_ID|GKAncoso|securityDenial;
2004/01/28 11:52:28.827 3 RasSrv.cxx(195) RAS Send to 192.168.1.11:1719
locationReject {
requestSeqNum = 6
rejectReason = securityDenial <<null>>
}
-----
Any hints?
Regards
-Stefan-
Attachment:
gatekeeper_ancoso.ini
Description: Binary data
