Think please of that: whence actually gnugk can find out where exactly to redirect a call? You see in yours ini file there are not present lines about it. That is there is no information on endpoints. Enter '??' throu Status-port and look at Registration table. Igor On 15 Январь 2004 22:59, Hardy Beltran Monasterios wrote: > Hello > > I have the following test configuration > > > Win98 Box --- NAT/gnugk Box ---[Win98 Box, ADSL Modem]----Internet > ^ ^ ^ ^ > > 192.168.10.0 192.168.10.1/ 200.87.xx.yb, 200.87.xx.ya > 200.87.xx.yc > > Both Win98 boxes were running Netmeeting version 3.01 (4.4.3396) > The Win98 box in the right side is a virtual PC, running on top of > VMWare Workstation version 4.0.1 for Linux. > > > NAT/gnugk is a Linux box running Red Hat 9.0 with Gatekeeper(GNU) > Version(2.0.6). > > Both netmeeting can log on successfully in GateKeeper > > I have tried to establish a call from Win98L (left) to Win98R (right) > and viceversa but it doesn't work. > > I running gnugk with the command: > > # ./gnugk -c gnugk.ini -o /var/log/gnugk.log -ttt > > On my Linux box I do > > [hardy@caribe hardy]$ telnet localhost 7000 > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > Version: > Gatekeeper(GNU) Version(2.0.6) Ext(pthreads=1) Build(Sep 24 2003, > 12:35:03) Sys(Linux i686 2.4.20-8) > Large fd_set(8192) enabled > > GkStatus: Version(1.0) Ext() > Toolkit: Version(1.0) Ext(basic) > Startup: Thu, 15 Jan 2004 21:20:26 +0400 Running: 0 days 01:56:40 > ; > RCF|192.168.10.80:1720|nadia:h323_ID|terminal|1991_endp; > RCF|200.87.122.59:1720|tux:h323_ID|terminal|1992_endp; > ACF|200.87.122.59:1720|1992_endp|14855|tux:h323_ID|tux:h323_ID=tux:h323_ID| >false; DCF|200.87.122.59|1992_endp|14855|normalDrop; > ACF|200.87.122.59:1720|1992_endp|14856|nadia:h323_ID|tux:h323_ID=tux:h323_I >D|false; DCF|200.87.122.59|1992_endp|14856|normalDrop; > ACF|192.168.10.80:1720|1991_endp|15077|tux:h323_ID|nadia:h323_ID=nadia:h323 >_ID|false; DCF|192.168.10.80|1991_endp|15077|normalDrop; > > I can't establish any calls > > This is my gnugk.ini configuration file > > ----- begin ----- > [Gatekeeper::Main] > Fourtytwo=42 > TimeToLive=600 > NetworkInterfaces=192.168.10.0/24,200.87.122.56/29 > > [RoutedMode] > GKRouted=1 > H245Routed=0 > CallSignalPort=1721 > CallSignalHandlerNumber=2 > RemoveH245AddressOnTunneling=1 > DropCallsByReleaseComplete=1 > SupportNATedEndpoints=1 > Q931PortRange=30000-30099 > H245PortRange=40000-40099 > > [Proxy] > Enable=1 > InternalNetwork=192.168.10.0/24 > T120PortRange=50000-50099 > RTPPortRange=50000-50099 > > [GkStatus::Auth] > rule=allow > ---- end ----- > > Does any one an idea how to solve this issue, maybe I'm doing something > wrong. > > TIA -- С уважением, Прохоров Игорь ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id┘49 Homepage: http://www.gnugk.org/
